A universal system for the removal and installation of Suspension Bushes, Bearings, Seals etc
By selecting the appropriate diameter sleeves, the bush / bearing / seal is ‘Pressed’, or ‘Pulled’ by the action of turning the spindle nuts in opposing directions. Fully universal applications for Cars, LCV’s HGV’s etc, with a range of kit options to suit individual requirements.
Press & Pull Sleeve Kits can be used in the following formats:
• As a stand alone set of tools
• With a standard workshop press
• With a Universal Press Frame (187000V2 or 18703500)
• With a Universal C Clamp (18780200 or 18780300)
• Can also be used with selected model specific Press Piece sets and in conjunction with optional hydraulic upgrade kits
All components are available individually as spare parts
• When used in conjunction with components from 08780000, or 08797500, these kits allow application of up to 12 tons of hydraulic force which can be used to provide a controlled force in place of the manual or mechanical effort required when using 08780000 / 08797500
• Contents:
- Hollow Ram Hydraulic Cylinder, Alignment washer and 2x extra-long heavy-duty spindles that are rated for use with the hydraulic ram. (Note: Standard 08780000 spindles are not rated for use with the 18782500 and / or 18792500 hydraulic ram)
• Cylinder: 8mm stroke