A universal system for the removal and installation of Suspension Bushes, Bearings, Seals etc By selecting the appropriate diameter sleeves, the bush / bearing / seal is ‘Pressed’, or ‘Pulled’ by the action of turning the spindle nuts in opposing directions. Fully universal applications for Cars, LCV’s HGV’s etc, with a range of kit options to suit individual requirements.
Press & Pull Sleeve Kits can be used in the following formats: • As a stand alone set of tools • With a standard workshop press • With a Universal Press Frame (187000V2 or 18703500) • With a Universal C Clamp (18780200 or 18780300) • Can also be used with selected model specific Press Piece sets and in conjunction with optional hydraulic upgrade kits
All components are available individually as spare parts, for full list of spare parts please see spare parts section or instructions in the downloads section.
• Universal applications - Car - LCV • Contains 20x Press Sleeves in 2mm diameter steps • Inside Diameter Range: 34 - 72mm • Outside Diameter Range: 44 - 82mm • 4x Step Plates / 4x Pulling Spindles with thrust bearings • Supplied in moulded storage case
A puller is a specialized tool used to remove or extract objects such as gears, bearings, pulleys, and other components that are pressed onto a shaft or otherwise tightly fitted onto another part. Pullers typically use mechanical force, such as a threaded screw or hydraulic pressure, to create a pulling action and separate the object from the component it is attached to.
At Partsformachines...