Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

find the right

Air Compressor

Start Now

Shop by Sub Category

FAQs

When air is needed continuously rather than in bursts. A piston machine cycles on and off and is sized on peak demand. A screw machine runs on and is sized on the flow it has to hold all day.

On free air delivery against the demand, not on motor power. Delivery runs 8 to 75.9 across this leaf with power from 2.2 to 75kW, and buying on power alone is the common way to end up short of flow.

They state what is included with the machine. The CXR ladder runs N, R, RD and DR forms covering receiver, dryer or both, so the specification is read off the model rather than assembled separately.

A receiver smooths demand and gives the machine somewhere to put air when the line is closed. Receivers on this leaf run 90 to 500 litres and are ordered as part of the machine rather than added afterwards.

Noise is stated on 62 of the lines here at 58 to 70dB, which is low enough that a screw machine can often sit where a piston machine could not without an enclosure.

They manage output against actual demand rather than running flat out, which cuts running cost on a machine that is on all day. They sit across the Fini MICRO ladder with controller variants alongside.

Clear

Screw Compressor

FilterFilters
View as Grid List

A screw compressor is chosen where air is needed continuously rather than in bursts. A piston machine cycles on and off and is sized on peak demand; a screw machine runs on and is sized on the flow it has to hold. Power in kW and free air delivery are the two figures that place it, and both sit on every listing here. That difference is why a screw machine is specified rather than upgraded to, and why the sizing question is asked first.

Free air delivery runs 8 to 75.9 across the leaf with power from 2.2 to 75kW and pressure from 8 to 15 bar. The small end covers a busy single bay and the large end covers a factory line. Sizing on delivery rather than on power avoids the common mistake of buying motor size and hoping the flow follows.

Receiver and dryer options are the next decision and they are ordered as part of the machine rather than added later. The Clarke CXR ladder runs from 3HP at 230V up to 100HP at 400V in N, R, RD and DR forms, where the letters state whether a receiver, a dryer or both are included. Receivers on this leaf run 90 to 500 litres. Ordering the dryer with the machine also means the two are matched on flow rather than paired afterwards.

Noise is stated on 62 lines from 58 to 70dB, which is low enough that a screw machine can often sit where a piston machine could not. Energy saving and controller variants across the Fini MICRO ladder manage output against demand rather than running flat out. Sizing questions go over WhatsApp on 07754288583 with the tool list. SIP, Power Systems G-TEC, FPS and TIGREN lines run alongside the Fini and Clarke ladders.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 30 of 234 entries
FAQs

When air is needed continuously rather than in bursts. A piston machine cycles on and off and is sized on peak demand. A screw machine runs on and is sized on the flow it has to hold all day.

On free air delivery against the demand, not on motor power. Delivery runs 8 to 75.9 across this leaf with power from 2.2 to 75kW, and buying on power alone is the common way to end up short of flow.

They state what is included with the machine. The CXR ladder runs N, R, RD and DR forms covering receiver, dryer or both, so the specification is read off the model rather than assembled separately.

A receiver smooths demand and gives the machine somewhere to put air when the line is closed. Receivers on this leaf run 90 to 500 litres and are ordered as part of the machine rather than added afterwards.

Noise is stated on 62 of the lines here at 58 to 70dB, which is low enough that a screw machine can often sit where a piston machine could not without an enclosure.

They manage output against actual demand rather than running flat out, which cuts running cost on a machine that is on all day. They sit across the Fini MICRO ladder with controller variants alongside.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service