Within Power Tools Accessories, Chargers and Boosters covers the battery management equipment used in trade workshops, fleet maintenance bays, and mobile-service operations — battery chargers (trickle, smart, and rapid), jump-start booster packs, battery testers and analysers, and battery-care accessories. This is the highest-demand sub-category within Power Tools Accessories. Sub-categories include Battery Chargers (trickle through smart through rapid units, 12V and 24V applications, dual-voltage workshop chargers), Boosters (the jump-start packs ranging from emergency car packs through commercial-vehicle and plant boosters), Battery Testers and Analyser (load testers, smart battery analysers, and CCA testing equipment), Battery Care (desulphators and battery-conditioning equipment), and Portable Power Stations (lithium-based portable power for off-grid and remote-site applications).
Parts For Machines is an Authorised Distributor and Seller of Sealey, SIP, and Draper across chargers and boosters. Sealey leads with the broadest range — the Sealey RoadStart series of jump-start booster packs is a trade standard for emergency vehicle starting; the Sealey SpeedCharge and SmartCharge ranges cover automatic multi-stage smart chargers; and the SuperBoost rapid chargers cover heavier fleet-workshop applications. SIP covers battery chargers and boosters across the trade-workshop range.
Draper covers the entry-trade end of chargers and boosters. Battery chargers are sold by output current (typically 4A through 100A for trade applications), supported voltages (12V single, 24V single, 12/24V dual), supported chemistries (flooded, AGM, EFB, gel, lithium where applicable), and charging programme (manual, multi-stage automatic, microprocessor-controlled).
Product pages list current, voltage, supported chemistries, and any specialist features (alternator support, glow-plug pre-heat function on diesel chargers). Boosters are sold by peak amps (PA), continuous amps, and supported voltage. Smaller emergency boosters at 600-800 PA cover cars and light vans; commercial and plant applications need 1,500-3,000 PA, often in 12V/24V dual-voltage configurations.