A mandatory sign tells people what they must do and is normally a blue circle, such as Hand Protection Must Be Worn, Wear Face Shield or Hi-Vis Jackets Must Be Worn. A prohibition sign tells people what they must not do and is normally a red circle with a diagonal bar, such as No Smoking, No Entry or No Access.
Match the size to the sign's job and viewing distance. On this page 300 x 100mm is the most common size, used for fire exit and instruction signs, with 80 x 80mm for small door signs such as Fire Door Keep Shut, 75 x 210mm for extinguisher signs, 200 x 300mm for hazard warnings and 600 x 200mm for large fire exit signs.
Choose the arrow that points the way a person should move from where they see the sign. Safe Condition Signs lists fire exit signs with up, down, left, right, down left and down right arrows, many at 300 x 100mm in rigid plastic or self-adhesive vinyl. Walk the escape route and note the direction needed at each point.
Use the sign that names the type of extinguisher kept at that point. The page lists CO2 and Foam fire extinguisher signs at 75 x 210mm in rigid plastic and self-adhesive vinyl, along with fire blanket and fire alarm symbol signs. Check each extinguisher's label, then order the matching sign for its location.
In the Sealey codes shown on this page, V marks self-adhesive vinyl and P marks rigid plastic, and the final number is the pack quantity. SS1V1 is a single vinyl Fire Door Keep Shut sign, SS1P1 is the same sign in rigid plastic, and codes ending in 10, such as SS46P10, are packs of 10.
Hazard Warning Signs includes garage-specific designs: MOT Testing Station, MOT Parking and MOT Viewing Area signs, Caution Do Not Use Lift, and 200 x 300mm Danger Waste Oil, Danger Oxygen Cylinders, Danger Acetylene Cylinders and Flammable Gas signs. Several come in both rigid plastic and self-adhesive vinyl, so choose the material to suit the mounting surface.
Warning Signs
This category covers safety signs for workshops, garages, sites and commercial premises. Pages follow the main sign groups: Safe Condition Signs, such as fire exit and fire blanket signs, Hazard Warning Signs, Mandatory Warning Signs, such as ear protection and mask requirements, and Prohibition Warning Signs, such as no entry. Garage-specific signs are included too, covering MOT parking, vehicle lift use, waste oil and oxygen cylinder warnings, along with CCTV signs.
Brands include Sealey and Draper. Signs are offered in self-adhesive vinyl and rigid plastic, as single signs or packs of 10, in sizes including 300 x 100mm and 200 x 300mm. Choose self-adhesive vinyl for smooth, clean surfaces and rigid plastic where a stiffer sign is needed on walls, doors or posts, and check the size against viewing distance.
A mandatory sign tells people what they must do and is normally a blue circle, such as Hand Protection Must Be Worn, Wear Face Shield or Hi-Vis Jackets Must Be Worn. A prohibition sign tells people what they must not do and is normally a red circle with a diagonal bar, such as No Smoking, No Entry or No Access.
Match the size to the sign's job and viewing distance. On this page 300 x 100mm is the most common size, used for fire exit and instruction signs, with 80 x 80mm for small door signs such as Fire Door Keep Shut, 75 x 210mm for extinguisher signs, 200 x 300mm for hazard warnings and 600 x 200mm for large fire exit signs.
Choose the arrow that points the way a person should move from where they see the sign. Safe Condition Signs lists fire exit signs with up, down, left, right, down left and down right arrows, many at 300 x 100mm in rigid plastic or self-adhesive vinyl. Walk the escape route and note the direction needed at each point.
Use the sign that names the type of extinguisher kept at that point. The page lists CO2 and Foam fire extinguisher signs at 75 x 210mm in rigid plastic and self-adhesive vinyl, along with fire blanket and fire alarm symbol signs. Check each extinguisher's label, then order the matching sign for its location.
In the Sealey codes shown on this page, V marks self-adhesive vinyl and P marks rigid plastic, and the final number is the pack quantity. SS1V1 is a single vinyl Fire Door Keep Shut sign, SS1P1 is the same sign in rigid plastic, and codes ending in 10, such as SS46P10, are packs of 10.
Hazard Warning Signs includes garage-specific designs: MOT Testing Station, MOT Parking and MOT Viewing Area signs, Caution Do Not Use Lift, and 200 x 300mm Danger Waste Oil, Danger Oxygen Cylinders, Danger Acetylene Cylinders and Flammable Gas signs. Several come in both rigid plastic and self-adhesive vinyl, so choose the material to suit the mounting surface.
Get exclusive updates on offers & latest trends in construction industry
By sharing your email, you agree to our privacy policy & terms of service
Cart
POPULAR CATEGORY
