Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

A multi-process welder is the right choice for varied workshop work where you switch between processes regularly — one machine, one set of consumables, one duty cycle to manage. Three separate welders make sense when each process is run at full duty cycle (busy fabrication shops with simultaneous welders running) or where the budget allows higher specialisation per process. For most independent garages and small fabrication shops, a multi-process unit covers most welding work in a single bay.

Match output to the heaviest section you weld. For 1-3mm sheet (bodywork, light fabrication): 100-150A. For 3-6mm plate (general fabrication, plant-frame repair): 150-200A. For 6-10mm plate (HGV chassis, heavy-frame repair): 200-300A. For 10-20mm and above (heavy plant, structural fabrication): 300-400A. The machine's duty cycle at maximum output also matters — sustained heavy welding needs higher duty cycle. Both ratings are on the product page.

Single-phase 230V welders typically max out around 200-220A output before drawing more current than a 32A circuit can supply. Three-phase 400V welders are needed above this — outputs of 250A+ generally require three-phase. Three-phase also delivers smoother arc characteristics on higher-output work. Check your workshop's electrical supply before ordering an industrial-output welder; the supply voltage and phase requirement are listed on product pages.

Replacement MIG torch tips, gas shrouds, drive rollers, MIG wire spools (steel, stainless, aluminium), TIG tungstens (thoriated, ceriated, lanthanated), TIG gas cups and back caps, MMA welding rods (general-purpose 6013, low-hydrogen 7018, stainless and special-alloy rods), gas regulators (argon, CO2, mixed gas), and gas hoses are available across the welding range. Match consumables to the machine model and process. Trade case-pack pricing applies on bulk consumable orders.

Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Multiple Combinations

FilterFilters
View as Grid List

Within Welding Machines, Multiple Combinations covers the multi-process welding machines that combine MIG, TIG, MMA (stick), and sometimes plasma-cutting capability in a single unit. Parts For Machines supplies multi-process welding machines for plant repair, agricultural fabrication, automotive bodywork, and general workshop welding. Multi-process machines suit workshops that handle varied work — switching between MIG (for fabrication and bodywork), TIG (for thin-sheet, stainless, and aluminium), and MMA stick (for site-work, heavy-section, and outdoor welding).

The economic case is simpler than running three separate machines: one welder with shared power-supply electronics handles all three processes. Parts For Machines is an Authorised Distributor and Seller of Sealey and SIP across the multi-combination welding machine range. Sealey leads the line with a wide range of MIG/TIG/MMA combination units across the trade and professional output ranges.

SIP extends the range with industrial-output combination machines. Clarke also features in the welding range at competitive trade pricing. Product pages list rated welding output (in amps — typical multi-process machines 160-250A trade, 250-350A industrial), supply voltage (230V single-phase for trade-grade, 400V three-phase for industrial), duty cycle (the percentage of a 10-minute period the machine can weld at maximum output without overheating — typical 30-60% at maximum, 100% at lower outputs), wire diameter range (for MIG — typically 0.6-1.2mm), electrode diameter range (for MMA — typically 1.6-5.0mm), and weight.

Replacement consumables — MIG torch tips and shrouds, TIG tungstens and gas cups, MMA welding rods, drive rollers, gas hoses, and gas regulators — are available for the majority of Sealey and SIP welding machines. Search by machine model code for the matched consumables. Trade pricing on multi-unit and workshop fit-out orders is available; contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 30 of 61 entries
FAQs

A multi-process welder is the right choice for varied workshop work where you switch between processes regularly — one machine, one set of consumables, one duty cycle to manage. Three separate welders make sense when each process is run at full duty cycle (busy fabrication shops with simultaneous welders running) or where the budget allows higher specialisation per process. For most independent garages and small fabrication shops, a multi-process unit covers most welding work in a single bay.

Match output to the heaviest section you weld. For 1-3mm sheet (bodywork, light fabrication): 100-150A. For 3-6mm plate (general fabrication, plant-frame repair): 150-200A. For 6-10mm plate (HGV chassis, heavy-frame repair): 200-300A. For 10-20mm and above (heavy plant, structural fabrication): 300-400A. The machine's duty cycle at maximum output also matters — sustained heavy welding needs higher duty cycle. Both ratings are on the product page.

Single-phase 230V welders typically max out around 200-220A output before drawing more current than a 32A circuit can supply. Three-phase 400V welders are needed above this — outputs of 250A+ generally require three-phase. Three-phase also delivers smoother arc characteristics on higher-output work. Check your workshop's electrical supply before ordering an industrial-output welder; the supply voltage and phase requirement are listed on product pages.

Replacement MIG torch tips, gas shrouds, drive rollers, MIG wire spools (steel, stainless, aluminium), TIG tungstens (thoriated, ceriated, lanthanated), TIG gas cups and back caps, MMA welding rods (general-purpose 6013, low-hydrogen 7018, stainless and special-alloy rods), gas regulators (argon, CO2, mixed gas), and gas hoses are available across the welding range. Match consumables to the machine model and process. Trade case-pack pricing applies on bulk consumable orders.

Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service