A table saw is fixed and mounted on a stand or workbench — the workpiece is fed through, ideal for long rip cuts and parallel cuts where the saw stays still. A mitre saw is also fixed but the blade swings down through a stationary workpiece — used for cross-cuts, mitre angles, and trim work. A circular saw is handheld — the saw is moved through the workpiece, used for site-work and rough cuts where portability matters. Most workshops use all three for different operations.
Match splitting force to the wood you're processing and the volume per session. For seasoned softwood and small-diameter hardwood (under 200mm), 4-6 tonne electric splitters handle most domestic and small-trade use. For green hardwood, larger logs (200-400mm), and higher volumes, 8-12 tonne splitters are standard. For commercial firewood production with logs up to 600mm and continuous-duty cycles, 15-tonne and above hydraulic splitters with engine drive are typical. Splitting force in tonnes and maximum log length are listed on product pages.
Yes. Replacement blades, sanding belts and discs, planer blades, and other wood-working consumables are available for the majority of Draper, SIP, and Sealey wood-working machines. Match the blade by diameter, arbor (centre hole), tooth count, and tooth profile (TCT for general work, alternate-bevel for fine cuts, ripping-tooth for fast cuts). The blade specs are listed on each blade product page.
Each Chicago Pneumatic woodworking tool has a rated air consumption listed on its product page (in CFM or L/min) and a working pressure (typically 6.2 bar / 90 PSI). Size your compressor to deliver at least 25% more than the tool's rated CFM at 90 PSI. For continuous-duty tools (sanders, large nailers), a 10+ CFM compressor is the practical minimum; for intermittent-use tools (small nailers, blow guns), smaller compressors suffice.
Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.
Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.
A table saw is fixed and mounted on a stand or workbench — the workpiece is fed through, ideal for long rip cuts and parallel cuts where the saw stays still. A mitre saw is also fixed but the blade swings down through a stationary workpiece — used for cross-cuts, mitre angles, and trim work. A circular saw is handheld — the saw is moved through the workpiece, used for site-work and rough cuts where portability matters. Most workshops use all three for different operations.
Match splitting force to the wood you're processing and the volume per session. For seasoned softwood and small-diameter hardwood (under 200mm), 4-6 tonne electric splitters handle most domestic and small-trade use. For green hardwood, larger logs (200-400mm), and higher volumes, 8-12 tonne splitters are standard. For commercial firewood production with logs up to 600mm and continuous-duty cycles, 15-tonne and above hydraulic splitters with engine drive are typical. Splitting force in tonnes and maximum log length are listed on product pages.
Yes. Replacement blades, sanding belts and discs, planer blades, and other wood-working consumables are available for the majority of Draper, SIP, and Sealey wood-working machines. Match the blade by diameter, arbor (centre hole), tooth count, and tooth profile (TCT for general work, alternate-bevel for fine cuts, ripping-tooth for fast cuts). The blade specs are listed on each blade product page.
Each Chicago Pneumatic woodworking tool has a rated air consumption listed on its product page (in CFM or L/min) and a working pressure (typically 6.2 bar / 90 PSI). Size your compressor to deliver at least 25% more than the tool's rated CFM at 90 PSI. For continuous-duty tools (sanders, large nailers), a 10+ CFM compressor is the practical minimum; for intermittent-use tools (small nailers, blow guns), smaller compressors suffice.
Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.
Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.
Get exclusive updates on offers & latest trends in construction industry
By sharing your email, you agree to our privacy policy & terms of service
Cart
POPULAR CATEGORY
