Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

find the right

Electrical Component

Start Now

Shop by Sub Category

Back to Category
  • Plant & Agriculture

Filters
Seal Kits

Cameras

Wheel Disc-Lock Nut and Socket

Electric Motor

FAQs

Match service intervals to the equipment manufacturer's recommendations. Typical intervals: engine oil filter — every oil change (250-500 hours for plant; 5,000-15,000 km for HGV). Engine air filter — annually or per filter restriction-indicator (whichever is sooner). Engine fuel filter — every 250-500 hours, or sooner if water-separator indicator triggers. Hydraulic filter — every 1,000-2,000 hours typical. Cab air filter — annually or 12-month intervals. Severe-duty service (dusty environments, water-contaminated fuel, heavy-load operation) shortens these intervals. Always check the equipment service schedule.

Quality aftermarket filters from specialist filter manufacturers (with proper filter-media specification, dimensional accuracy, and rated to the OEM filtration specification) match OEM filter performance and service life. Lower-cost generic-aftermarket filters may have inferior filter media (lower filtration efficiency, lower contamination capacity, shorter service life). For trade-and-fleet service, specialist-brand aftermarket filters are the practical choice. Identify the original filter's manufacturer where listed; typically the same manufacturer's aftermarket equivalent is the most reliable replacement at lower cost than OEM.

Fuel filters are critical for diesel engine protection. Match by: (1) OEM cross-reference part number — the most reliable; (2) filter dimensions — overall diameter, height, sealing-ring size, and thread size on the filter mounting; (3) filtration rating — the engine manufacturer specifies the maximum micron rating for the engine's fuel-injection system (typical 5-10 microns for modern common-rail; 10-30 microns for older mechanical injection). Wrong-rated filters cause injector damage and high-pressure-pump wear. The micron rating is on every fuel-filter product page.

Yes. Service-pack kits (combining engine oil filter, engine air filter, fuel filter, and hydraulic filter for a specific equipment service interval — sized to do one complete service from a single pack) are available across the plant-equipment range. Service packs are typically 10-20% cheaper than buying filters individually and ensure all the right filters are on the bench when starting the service. Match by the equipment make, model, and service interval. WhatsApp 07754288583 with the equipment details for service-pack availability.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Filters

FilterFilters
View as Grid List

Within Plant & Agriculture, Filters covers the engine, hydraulic, and equipment-system filters fitted to plant equipment, agricultural tractors, telehandlers, commercial vehicles, and the wider plant-and-vehicle filtration aftermarket — covering engine air filters (intake-air filtration, in panel and round-canister formats), engine oil filters (in spin-on, cartridge, and centrifugal-bypass formats), fuel filters (primary water-separator and secondary fine-fuel filters for diesel engines; in-line and cartridge formats), hydraulic filters (return-line, pressure-line, and suction-line filters for hydraulic-circuit cleanliness), cab air filters (for operator-cab HVAC systems — particle and activated-carbon filtration), and the matching filter housings, sealing rings, and service hardware.

Parts for Machines supplies filters across the plant, agricultural, and commercial-vehicle aftermarket. The category covers both OEM-pattern filters (matched exactly to specific equipment fitments by housing and filter dimensions) and high-quality aftermarket filters from specialist filter manufacturers.

Product pages list the filter type (engine air, oil, fuel, hydraulic, cab-air), the equipment application (the equipment make, model, and engine the filter fits), the OEM cross-reference part number, the filter dimensions (overall diameter, height, sealing-ring size), the filter rating (the smallest particle size filtered — typical 5-30 microns for hydraulic; 10-30 microns for fuel), the filter capacity (how much contamination the filter can hold before reaching pressure-drop limits), the filter media (paper, synthetic, glass-fibre, micro-glass for ultra-fine filtration), and any specific service-life specification.

For replacement of an existing filter, the OEM part number is the most reliable match. Filters have specific dimensional and filtration ratings — wrong-spec substitution gives inadequate filtration (engine wear, hydraulic-circuit contamination) or excessive flow restriction (engine starvation, hydraulic-pump damage). Always specify the OEM-equivalent filter for the equipment. Trade pricing on bulk service-pack orders is available; contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 211 to 227 of 227 entries
FAQs

Match service intervals to the equipment manufacturer's recommendations. Typical intervals: engine oil filter — every oil change (250-500 hours for plant; 5,000-15,000 km for HGV). Engine air filter — annually or per filter restriction-indicator (whichever is sooner). Engine fuel filter — every 250-500 hours, or sooner if water-separator indicator triggers. Hydraulic filter — every 1,000-2,000 hours typical. Cab air filter — annually or 12-month intervals. Severe-duty service (dusty environments, water-contaminated fuel, heavy-load operation) shortens these intervals. Always check the equipment service schedule.

Quality aftermarket filters from specialist filter manufacturers (with proper filter-media specification, dimensional accuracy, and rated to the OEM filtration specification) match OEM filter performance and service life. Lower-cost generic-aftermarket filters may have inferior filter media (lower filtration efficiency, lower contamination capacity, shorter service life). For trade-and-fleet service, specialist-brand aftermarket filters are the practical choice. Identify the original filter's manufacturer where listed; typically the same manufacturer's aftermarket equivalent is the most reliable replacement at lower cost than OEM.

Fuel filters are critical for diesel engine protection. Match by: (1) OEM cross-reference part number — the most reliable; (2) filter dimensions — overall diameter, height, sealing-ring size, and thread size on the filter mounting; (3) filtration rating — the engine manufacturer specifies the maximum micron rating for the engine's fuel-injection system (typical 5-10 microns for modern common-rail; 10-30 microns for older mechanical injection). Wrong-rated filters cause injector damage and high-pressure-pump wear. The micron rating is on every fuel-filter product page.

Yes. Service-pack kits (combining engine oil filter, engine air filter, fuel filter, and hydraulic filter for a specific equipment service interval — sized to do one complete service from a single pack) are available across the plant-equipment range. Service packs are typically 10-20% cheaper than buying filters individually and ensure all the right filters are on the bench when starting the service. Match by the equipment make, model, and service interval. WhatsApp 07754288583 with the equipment details for service-pack availability.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service