Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

Back to Category
  • Plant & Agriculture

Filters
Seal Kits

Cameras

Wheel Disc-Lock Nut and Socket

Electric Motor

FAQs

On most plant equipment, reversing cameras significantly improve safety. Plant equipment typically has poor rearward visibility from the cab — large counterweights, machinery superstructure, and limited window placement create rear blind spots. A reversing camera gives the operator a clear view of the area immediately behind the equipment, critical when reversing around personnel, structures, or other equipment. Many sites now mandate reversing cameras on all plant operating in mixed-traffic environments. Some equipment manufacturers fit cameras as standard; aftermarket retrofit is common for older equipment.

HD 720p (1280×720): adequate for most plant-and-vehicle reversing-camera applications. The image quality is sufficient to identify hazards at typical reversing distances (up to 10-15 metres). Lower data bandwidth, lower system cost. HD 1080p (1920×1080): noticeably sharper image, better for identifying small obstacles or near-far distance distinctions, supports higher-resolution display monitors. Higher cost, requires higher-bandwidth cabling. For trade-and-fleet plant use, 720p is the practical baseline; 1080p is preferred where premium image quality matters or where the camera feed is recorded for incident review.

Wired systems: physical cable from camera to display — typical 5-20 metre runs. More reliable signal (no wireless interference issues), more secure (no risk of signal spoofing or jamming). Better for permanent installations. Wireless systems: short-range radio transmitter at the camera, receiver at the display. Easier installation (no cable routing through the equipment chassis), useful for trailer-mounted cameras where the cable would need to disconnect. Wireless systems can suffer interference from other equipment radio signals. For permanent fitments, wired is the trade preference. The system type is on every product page.

Yes — replacement and additional cab display monitors (in 5", 7", 9", 10" diagonal sizes, with optional integrated speakers for audio playback), digital video recorder (DVR) units for recording camera feeds (with internal HDD, SD-card, or cloud storage options for fleet incident recording), multi-camera switching modules (for systems where multiple cameras feed a single display, with manual or automatic switching), and matching mounting brackets and cable harnesses are available across the camera-system accessory range. WhatsApp 07754288583 for advice on multi-camera fleet specifications.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Cameras

FilterFilters
View as Grid List

Within Plant & Agriculture, Cameras covers the on-vehicle camera systems fitted to plant equipment, agricultural tractors, telehandlers, commercial vehicles, and the wider plant-and-vehicle-camera aftermarket — covering reversing cameras (rear-mounted cameras with display in the cab for safe reverse manoeuvring), side-camera systems (for blind-spot monitoring on long vehicles and articulated equipment), surround-view multi-camera systems (with stitched 360-degree views across multiple cameras), recording dashcams (for fleet incident-recording and driver-behaviour monitoring), and the matching cab-mounted display monitors, harnesses, and electrical accessories.

Parts for Machines supplies camera systems across the plant, agricultural, and commercial-vehicle aftermarket. Modern plant and HGV camera systems are LED-backlight monitor and digital camera technology — replacing earlier analogue CCTV-style cameras with higher resolution, improved low-light performance, and digital signal processing for noise reduction and image clarity.

Product pages list the system type (single-camera reversing, dual-camera side-view, surround-view multi-camera, recording dashcam), the camera resolution (typical 720p HD; HD 1080p for premium systems), the operating voltage (12V or 24V to match the equipment electrical system), the IP rating (IP67 minimum for outdoor and weather-exposed installation; IP69K for high-pressure-washdown applications), the night-vision capability (typical IR LED illuminators built into the camera body for low-light visibility), the cable length (the supplied harness from camera to display), the matching display monitor (size — typical 5", 7", 9", 10" diagonal — and mount style), the trigger input (reverse-light-activated for reversing cameras; manual or automatic for other camera types), and the recording capability where applicable.

For trade-fleet installations across multiple vehicles, specifying matched camera-and-display kits across the fleet keeps the spare-parts and service workflow simpler. Trade pricing on bulk and fleet orders is available; contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 6 of 6 entries
FAQs

On most plant equipment, reversing cameras significantly improve safety. Plant equipment typically has poor rearward visibility from the cab — large counterweights, machinery superstructure, and limited window placement create rear blind spots. A reversing camera gives the operator a clear view of the area immediately behind the equipment, critical when reversing around personnel, structures, or other equipment. Many sites now mandate reversing cameras on all plant operating in mixed-traffic environments. Some equipment manufacturers fit cameras as standard; aftermarket retrofit is common for older equipment.

HD 720p (1280×720): adequate for most plant-and-vehicle reversing-camera applications. The image quality is sufficient to identify hazards at typical reversing distances (up to 10-15 metres). Lower data bandwidth, lower system cost. HD 1080p (1920×1080): noticeably sharper image, better for identifying small obstacles or near-far distance distinctions, supports higher-resolution display monitors. Higher cost, requires higher-bandwidth cabling. For trade-and-fleet plant use, 720p is the practical baseline; 1080p is preferred where premium image quality matters or where the camera feed is recorded for incident review.

Wired systems: physical cable from camera to display — typical 5-20 metre runs. More reliable signal (no wireless interference issues), more secure (no risk of signal spoofing or jamming). Better for permanent installations. Wireless systems: short-range radio transmitter at the camera, receiver at the display. Easier installation (no cable routing through the equipment chassis), useful for trailer-mounted cameras where the cable would need to disconnect. Wireless systems can suffer interference from other equipment radio signals. For permanent fitments, wired is the trade preference. The system type is on every product page.

Yes — replacement and additional cab display monitors (in 5", 7", 9", 10" diagonal sizes, with optional integrated speakers for audio playback), digital video recorder (DVR) units for recording camera feeds (with internal HDD, SD-card, or cloud storage options for fleet incident recording), multi-camera switching modules (for systems where multiple cameras feed a single display, with manual or automatic switching), and matching mounting brackets and cable harnesses are available across the camera-system accessory range. WhatsApp 07754288583 for advice on multi-camera fleet specifications.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service