
Quick delivery and the product at a very competitive price.
Highly Recommend
I ordered a starter motor for my Polaris ranger, best price around and prompt service.
thanks for sending the part so quickly, and was just the job
1st class,excellent service.
Excellent service
You stock the parts that I needed and delivered quickly and efficiently.
Worth the Money
Strong and Excellent Quality.
10 out of 10 from me!
Great price.
Great delivery.
Very easy transaction the machine arrived on time and well packaged,
Absolutely spot on!
Excellent website, easy ordering, great price, speedy delivery and an excellent machine at an excellent price!
Thanks very much!!
Great service with speedy delivery, easy ordering system and great during & after service support.
Save Extra With 1 Offer
A. NLGI is the universal grease consistency standard every reputable grease meets, ranging from NLGI 000 (semi-fluid) to NLGI 3 (firm). It is your baseline check — match the grade your handbook specifies (e.g., NLGI 2 for most multi-purpose applications) and the grease is technically suitable for your machine. Every grease on our site lists its NLGI grade.
A. Castrol Spheerol EPL 2 is an NLGI 2 grade grease, the standard consistency for general bearing lubrication.
A. Castrol Spheerol EPL 2 is formulated from lithium soap thickener with highly refined mineral base oil.
A. Yes, Castrol Spheerol EPL 2 contains extreme-pressure additives providing good film strength under medium to high loads.
A. Castrol Spheerol EPL 2 is designed for general plant-wide bearing lubrication, including vertically mounted bearings and components exposed to vibration.
A. Castrol Spheerol EPL 2 has a dropping point of 190°C (374°F) per the IP 396 test method.
A. Yes, Castrol Spheerol EPL 2 has good water wash-out resistance, making it suitable for equipment where moist or wet conditions are common.
A. The number is the NLGI grade — higher number means stiffer consistency. EPL 0 and EPL 00 are softer semi-fluid grades for centralised lubrication systems and grease-filled gearboxes; EPL 1 is softer than the standard; EPL 2 is the general-purpose standard for bearing lubrication; EPL 3 is stiffer, suited to vertically mounted bearings or high-vibration applications.
A. An OEM Specification is the grease requirement set by a vehicle or equipment manufacturer (e.g., MB 267.0, MAN 283 Li-P 2). When a grease lists the code, the grease manufacturer has developed and tested it to meet the criteria the equipment manufacturer requires. Match the code in your handbook and you have a grease engineered for your machine.
A. An OEM Approval means the grease has been formally tested and signed off by the equipment manufacturer and listed on their official approved-products register (e.g., MB-Approval 267.0). An Approval confirms the grease is recognised by the equipment manufacturer for service use in their machines.
By sharing your email, you agree to our privacy policy & terms of service