Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

Match impact frequency and stroke length to the work. For panel and bodywork (light cutting, joint-pickle work, dent removal), high-frequency (3,500-4,500 BPM) short-stroke (50-65mm) air hammers give controlled fast impacts. For heavy-duty work (suspension components, exhaust bracket and pipe work, ball-joint separation), medium-frequency (2,500-3,500 BPM) longer-stroke (75-90mm) air hammers give higher energy per blow. For surface preparation and rust descaling, needle scalers (a multi-needle hammer) are purpose-built. The frequency and stroke are listed on every product page.

Standard air-hammer bit shank size is .401 inch (10.2mm) — fits most pistol-grip air hammers. Common bit types: flat chisel (general cutting), tapered punch (panel-pin work, panel-joint pickling), exhaust-pipe cutter (curved blade for cutting through exhaust pipes), tail-pipe cutter, ball-joint separator (forked bit for tie-rod and ball-joint separation), bushing-removal punch, and specialist bits for specific tasks. Most workshops carry a multi-bit kit covering the common applications. Search by '.401 air hammer bits'.

Air hammers are relatively high-CFM tools — typical 4-10 CFM at 6.2 bar / 90 PSI for pistol-grip air hammers; higher for needle scalers and heavy-duty chipping hammers. The compressor must deliver this CFM at the operating pressure on continuous use; a smaller compressor will run out of air during sustained hammering. Match compressor continuous-output rating to the tool's CFM demand plus 25% margin. The CFM rating is listed on every air-hammer product page.

Yes. Replacement bit-retention springs (the spring at the chuck end of the air hammer that holds the bit in place — wears with use), replacement chuck bushings (the inner sleeve that guides the bit shank), replacement motor vanes, and motor service-kit components are available for the majority of SIP, Nuair, and Sealey air hammers. The bit-retention spring is a frequent service item; the chuck bushing wears more slowly. Search by the air hammer model code, or WhatsApp 07754288583.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Air Hammer

FilterFilters
View as Grid List

Within Air Tools, Air Hammer covers the pneumatic-driven impact-hammer tools used in workshop chiselling, panel work, suspension service, and exhaust-pipe and bushing work — covering compact pistol-grip air hammers (general-workshop use), heavy-duty needle scalers and chipping hammers (for surface preparation, scale removal, and rust descaling), and the specialist air-hammer chisels and bits used with the tool body.

Parts for Machines supplies air hammers across the trade and professional ranges, with rated impact frequencies typically running from 2,000 BPM (heavy-duty needle scalers and chipping hammers) up to 4,500+ BPM (compact pistol-grip air hammers for panel and bodywork use), and stroke lengths matched to the application.

We are an authorised distributor and seller of SIP, Nuair, and Sealey across the air hammer range. SIP and Nuair lead the line — covering trade-grade pneumatic air hammers across the standard pistol-grip and inline configurations, plus heavy-duty needle scalers and chipping hammers for fabrication and bodywork use. Sealey extends the range with workshop and trade-grade variants.

Product pages list the impact frequency (in BPM — beats per minute, typical 2,000-4,500), the stroke length (in mm — typical 50-90mm; longer strokes give more energy per blow), the air consumption (in CFM at 6.2 bar / 90 PSI — typical 4-10 CFM), the operating pressure (typical 6.2 bar / 90 PSI), the chuck or bit-holder type (typical .401 inch (10.2mm) shank for general air-hammer bits; some heavy-duty hammers use larger shank sizes), the body type (pistol-grip with side-mounted exhaust; inline for confined-space work), and the noise rating in dB(A). Always wear hearing protection and impact-rated gloves when operating air hammers — they generate significant vibration and noise. Match the bit to the application — chisels for cutting, scrapers for surface work, exhaust-cutter bits for pipe-cutting work. Trade pricing on multi-tool orders is available; contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 31 to 39 of 39 entries
FAQs

Match impact frequency and stroke length to the work. For panel and bodywork (light cutting, joint-pickle work, dent removal), high-frequency (3,500-4,500 BPM) short-stroke (50-65mm) air hammers give controlled fast impacts. For heavy-duty work (suspension components, exhaust bracket and pipe work, ball-joint separation), medium-frequency (2,500-3,500 BPM) longer-stroke (75-90mm) air hammers give higher energy per blow. For surface preparation and rust descaling, needle scalers (a multi-needle hammer) are purpose-built. The frequency and stroke are listed on every product page.

Standard air-hammer bit shank size is .401 inch (10.2mm) — fits most pistol-grip air hammers. Common bit types: flat chisel (general cutting), tapered punch (panel-pin work, panel-joint pickling), exhaust-pipe cutter (curved blade for cutting through exhaust pipes), tail-pipe cutter, ball-joint separator (forked bit for tie-rod and ball-joint separation), bushing-removal punch, and specialist bits for specific tasks. Most workshops carry a multi-bit kit covering the common applications. Search by '.401 air hammer bits'.

Air hammers are relatively high-CFM tools — typical 4-10 CFM at 6.2 bar / 90 PSI for pistol-grip air hammers; higher for needle scalers and heavy-duty chipping hammers. The compressor must deliver this CFM at the operating pressure on continuous use; a smaller compressor will run out of air during sustained hammering. Match compressor continuous-output rating to the tool's CFM demand plus 25% margin. The CFM rating is listed on every air-hammer product page.

Yes. Replacement bit-retention springs (the spring at the chuck end of the air hammer that holds the bit in place — wears with use), replacement chuck bushings (the inner sleeve that guides the bit shank), replacement motor vanes, and motor service-kit components are available for the majority of SIP, Nuair, and Sealey air hammers. The bit-retention spring is a frequent service item; the chuck bushing wears more slowly. Search by the air hammer model code, or WhatsApp 07754288583.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service