Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | FREE | 1 to 2 working days |
| Next Day | £23.94 |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 7 to 10 working days |
Product Number: 90245000
Variations
| Product Dimensions (L x W x H) | 500 x 200 x 90 mm |
|---|---|
| Product Weight | 6.3 Kg |
| Drive | 15mm / Hex |
| Length | 380 mm |
| Air Nipple | 3/8" |
| Air Hose | 13mm / 1/2" |
| Air Consumption | 210 l/min |
| Impacts/min | 2,500 Bpm |
| Air Pressure | 6.2 bar |
| Noise Pressure Level | 104 dbA |
| Noise Performance Level | 115 dbA |
| Vibration Acceleration | 20.4 m/s² |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price | |
|---|---|---|---|---|---|
|
90245500 | Sykes Pickavant 90245500 VIBRO IMPACT XL HAMMER INSERT | 1 Unit |
£204.54
£200.53
|
Add |
|
902400SP | Sykes Pickavant 902400SP 4 PACK CHISEL SET FOR 90245000 | 1 Unit |
£591.82
£580.22
|
Add |
|
90245100 | Sykes Pickavant 90245100 CHISEL END BIT | 1 Unit |
£101.85
£99.85
|
Add |
Standard Delivery: UK Mainland Free
Next Day Delivery Available
Delivery Estimate: 1 to 2 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Sykes Pickavant 90245500 VIBRO IMPACT XL HAMMER INSERT
£204.54
£200.53
2% OFF
Free delivery in UK Mainland
|
Sykes Pickavant 90206000 Vibro Impact Air Hammer
£383.87
£376.34
2% OFF
Free delivery in UK Mainland
|
|||||||||
| Technical Specification | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| PRODUCT NUMBER | 90222000 | 90245500 | 90238500 | 90228000 | 90236200 | APT517 | 90206000 | APS234/HMR | 8941071500 | 8941071601 | 8941071101 |
A. It is designed for loosening tight connections on HGVs, agricultural and construction vehicles.
A. It has a fifteen millimetre hex drive for use with dedicated Vibro Impact inserts.
A. It typically uses about two hundred ten litres per minute at six point two bar air pressure.
A. It delivers around two thousand five hundred blows per minute for high performance loosening.
A. The tool weighs approximately five point four kilograms and is about three hundred eighty millimetres long.
A. A built in shock absorber minimises risk of damage if too much pressure is inadvertently applied.
A. It helps disassemble conical seat connections, wheel bearings, bushes and rusted screw connections.
A. Yes, it can ease removal of many seized suspension parts where controlled vibration is advantageous.
A. Noise pressure is around one hundred four decibels A and performance level around one hundred fifteen decibels.
A. No inserts are included with this part number; appropriate Vibro Impact bits must be ordered separately.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
