Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

Match three things: (1) spring length range — the compressor must accommodate the spring at full compression travel; (2) spring rating — high-tension springs (sports cars, performance suspension) need higher-rated compressors; (3) coil pitch and diameter — the hook-jaws or through-rod must engage the coils correctly. For general car and light-commercial work, hook-pattern internal spring compressors cover the typical range. For McPherson-strut work and high-tension springs, through-rod compressors with safety cages give better safety margins.

Hook-pattern compressors grip the spring coils with hooked jaws — if a jaw slips off the coil during compression, the spring releases its energy in an uncontrolled direction. Through-rod compressors run a threaded rod through the centre of the spring, with the spring captured between two end plates — there's no jaw to slip, and the safety-cage construction contains the spring even if a component fails. For high-tension springs and McPherson-strut work where slip-risk is highest, through-rod with safety cage is the preferred trade-workshop tool. The compressor type is listed on every product page.

At minimum: safety glasses or full face-shield (rated for high-energy impact), heavy-duty gloves (for grip and forearm protection), and steel-toed boots (in case the spring or compressor falls). For higher-tension springs and high-energy work, additional impact-rated body armour (ballistic vest) is recommended in some specialist trade workshops. Never stand directly in line with the spring's direction of release; position to one side. Never operate a spring compressor while wearing loose clothing or jewellery that could catch.

Yes — bench-mounted spring compressors (with the spring captured in a steel safety cage, hydraulic or mechanical compression action, and integrated controls for the operator at a safe distance) are available for high-volume workshops. Safety-cage upgrades for portable through-rod compressors (where the original tool didn't include a cage) are available where the compressor maker supplies them. For trade workshops doing routine spring work, a bench-mounted compressor with safety cage is the safest investment. WhatsApp 07754288583 for advice.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Spring Compressors

FilterFilters
View as Grid List

Within Vehicle Steering & Suspension Tools, Spring Compressors covers the specialist tools used to safely compress vehicle coil springs during suspension service work — covering hook-pattern internal spring compressors (the workshop standard, with hooked jaws that grip the spring coils internally), through-rod spring compressors with safety-cage construction (for higher-tension springs and McPherson-strut work), bench-mounted spring compressors (for high-volume workshop use), and the matched safety equipment (impact-rated safety chains, blast-proof cages) used during compression operations.

Parts for Machines supplies spring compressors across the trade and professional ranges, covering both general workshop spring compressors (sized for the typical car and light-commercial coil-spring range) and the heavy-duty industrial spring compressors used in plant-equipment, agricultural, and heavy-vehicle suspension service.

Product pages list the compressor type (internal hook-pattern, through-rod with safety cage, bench-mounted), the rated compression capacity (the maximum spring length and stiffness the compressor can safely handle), the jaw or coil-engagement specification (the size and pitch range of springs the compressor fits), the construction (high-tensile steel rods and forged-steel hook jaws for trade-grade compressors; specifically rated steel for the through-rod and safety-cage variants), the stroke length (the maximum compression travel), and the operating mechanism (manual screw-thread, ratchet-action, or hydraulic for the largest industrial variants).

Spring compression is a high-energy operation — a fully-compressed coil spring stores significant energy and can release violently if the compressor fails or is misused. Always use the correct compressor for the spring rating, follow the manufacturer's procedure, and wear impact-rated PPE. Trade pricing on multi-tool orders is available; contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 23 of 23 entries
FAQs

Match three things: (1) spring length range — the compressor must accommodate the spring at full compression travel; (2) spring rating — high-tension springs (sports cars, performance suspension) need higher-rated compressors; (3) coil pitch and diameter — the hook-jaws or through-rod must engage the coils correctly. For general car and light-commercial work, hook-pattern internal spring compressors cover the typical range. For McPherson-strut work and high-tension springs, through-rod compressors with safety cages give better safety margins.

Hook-pattern compressors grip the spring coils with hooked jaws — if a jaw slips off the coil during compression, the spring releases its energy in an uncontrolled direction. Through-rod compressors run a threaded rod through the centre of the spring, with the spring captured between two end plates — there's no jaw to slip, and the safety-cage construction contains the spring even if a component fails. For high-tension springs and McPherson-strut work where slip-risk is highest, through-rod with safety cage is the preferred trade-workshop tool. The compressor type is listed on every product page.

At minimum: safety glasses or full face-shield (rated for high-energy impact), heavy-duty gloves (for grip and forearm protection), and steel-toed boots (in case the spring or compressor falls). For higher-tension springs and high-energy work, additional impact-rated body armour (ballistic vest) is recommended in some specialist trade workshops. Never stand directly in line with the spring's direction of release; position to one side. Never operate a spring compressor while wearing loose clothing or jewellery that could catch.

Yes — bench-mounted spring compressors (with the spring captured in a steel safety cage, hydraulic or mechanical compression action, and integrated controls for the operator at a safe distance) are available for high-volume workshops. Safety-cage upgrades for portable through-rod compressors (where the original tool didn't include a cage) are available where the compressor maker supplies them. For trade workshops doing routine spring work, a bench-mounted compressor with safety cage is the safest investment. WhatsApp 07754288583 for advice.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service