Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £5.99 | 1 to 2 working days |
| Next Day | £23.94 |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
Extracting damaged, rounded, or seized fasteners and components within a defined size range requires a tool with a controlled gripping mechanism that can adjust to the actual workpiece dimension. The Sykes Pickavant 09581300 Extractor covers the 18mm to 22.5mm size range, providing a single tool that handles fasteners and components within this specific span without requiring separate tools for each individual size.
The continuous size range from 18mm to 22.5mm means the tool is not limited to standard increments — it adjusts to whatever the actual measured size of the workpiece is, including non-standard or partially worn dimensions where a discrete-size socket would not engage securely.
This size band sits within a wider extractor range from Sykes Pickavant covering progressively larger and smaller dimensions, allowing workshops to assemble a coverage set that matches the fastener and component sizes encountered in their specific work. The 09581400 covers 22.5mm to 30mm and is the natural complement to this tool for larger work.
The extractor is intended for professional workshop use where seized or damaged fasteners need to be removed without damaging the surrounding workpiece, and where the unknown or non-standard dimensions of a damaged fastener rule out conventional sockets.
Sykes Pickavant has been supplying specialist extraction tooling for decades, and the 09581300 reflects the brand's focus on practical solutions for damaged fastener removal.
Additional Information
The split collet is pushed into the centre of the bearing and then expandedvia the hex nut on the end of the collet until a secure grip is achieved.The slide hammer is then attached providing the necessary extracting force.Internal Spread Min - Max: 19-22mmNo.3 - stamped on extractor
About PartsForMachines:
PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Product Dimenstions (L x W x H) | 120 x 90 x 20 mm |
|---|---|
| Product Weight | 0.142 Kg |
Standard Delivery: £5.99
Next Day Delivery Available
Delivery Estimate: 1 to 2 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||||||
| Technical Specification | ||||||||
|---|---|---|---|---|---|---|---|---|
| PRODUCT NUMBER | 09580900 | 09581000 | 09581100 | 09581200 | 09581400 | 09581500 | 09581600 | 09581700 |
| Type | Spare Part | Spare Part | Spare Part | Spare Part | Spare Part | Spare Part | Spare Part | Spare Part |
A. It is a split collet internal extractor covering 19–22mm internal spreads, used with a slide hammer to remove bearings or sleeves.
A. The collet is pushed into the bearing centre and expanded via a hex nut until it grips, then a slide hammer provides pulling force.
A. The internal spread range is 19–22mm, and it is stamped as size number three.
A. It grips from inside when there is no edge for puller legs to catch, allowing removal from blind holes or recessed bores.
A. It is typically used with a compatible slide hammer and internal extraction kit in the Sykes Pickavant range.
A. Confirm the collet expands evenly, threads on the hex nut and slide hammer connection are sound and the collet body is undamaged.
A. Apply controlled impact strokes, keeping the hammer aligned with the bore axis to avoid side loading.
A. Store it in an organised internal extractor kit case or tray labelled with its size number and range.
A. Too small a collet will not grip, while too large could damage the bore or fail to seat fully behind the component.
A. “09581300 internal extractor 19–22mm No.3” or similar queries would be appropriate."
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
