Filters
Cutting capacity is the first number and it means the largest section the machine will take, not the size of the machine. The range runs 6in through 8in, 10in, 12in and 15in on the SIP swivel head bodies, with 18in above them and 150mm and 300mm on the Sealey machines. Stock larger than the capacity will not pass the blade whatever the motor does.
Supply phase is a hard constraint rather than a preference. Single phase machines run from a standard supply, three phase machines do not, and the larger 12in and 18in bodies here appear in both. Confirming what the building actually has, before choosing, avoids a machine that cannot be connected. A machine on the wrong phase cannot be corrected by an adaptor, which is why the supply comes before the specification.
Head action decides how the machine is used. A swivel head pull-down saw is drawn down through the work by hand and swivels for mitre cuts. A horizontal machine with a hydraulic arm lowers itself at a controlled rate, which is what allows a cut to be started and left. Vari-speed and manual or auto-cut forms sit between the two.
Blade size is fixed by the machine and stated per line, which matters because blades are the consumable here and the wrong length will not tension. An abrasive cut-off saw at 14in and a three phase industrial circular saw at 12in cover the cuts a bandsaw does not suit. Sheet metal folders sit on the same leaf. Questions go over WhatsApp on 07754288583. Sealey hold industrial power bandsaws above the 150mm bench machines, with mitre and quick-lock vice forms between them.
| Input Supply | 230v (13A) |
|---|---|
| Motor Power | 370w (0.5hp) |
| Transmission | Belt-Driven Gearbox |
| Blade Speed Range | 20mtr/min / 29mtr/min / 50mtr/min |
| Blade Size | 1638mm x 12.5mm x 0.64mm |
| ITEM NO | 01594 |
|---|---|
| Input Supply | 230v (13A) |
| Motor Power | 1.5hp (1.1kW) |
| Operating Speed | 4 speeds |
| Blade Speed Range | 22mtr/min / 33mtr/min / 45mtr/min / 65mtr/min |
| ITEM NO | 01595 |
|---|---|
| Input Supply | 3-PHASE 400v (5A) |
| Motor Power | 1hp (0.75kW) |
| Operating Speed | 4 speeds |
| Speed Range | 22 / 33 / 45 / 65mtr/min |
| Input Supply | 230v (13A) |
|---|---|
| Motor Power | 1.1kW (1.5hp) |
| Transmission | Direct Drive 3-Speed Gearbox |
| Blade Speed Range | 39mtr/min / 55mtr/min / 67mtr/min |
| Blade Size | 2360mm x 20mm x 0.9mm |
| ITEM NO | 01520 |
|---|---|
| Input Supply | 230v (13A) |
| Motor Power | 1.1kW (1.5hp) |
| Operating Speed | 80mtr/min |
| Blade Size | 20mm x 0.9mm x 2085mm |
| ITEM NO | 01593 |
|---|---|
| Input Supply | 230v (13A) |
| Motor Power | 1.5hp (1.1kW) |
| Operating Speed | 4 speeds |
| Speed Range | 22 / 33 / 45 / 65mtr/min |
| ITEM NO | 01565 |
|---|---|
| Input Supply | 400v (5A) |
| Motor Power | 1hp (0.75kW) / 1.7hp (1.1kW) |
| Blade Speed | 18rpm @ 1hp / 36rpm @ 1.7hp |
| Blade Size | max. 315mm |
| ITEM NO | 01524 |
|---|---|
| Input Supply | 230v (13A) |
| Motor Power | 1.1kW (1.5hp) |
| Operating Speed | 72mtr/min |
| Blade Size | 27mm x 0.9mm x 2455mm |
| Input Supply | 230v (13A) |
|---|---|
| Motor Power | 1.1kW (1.5hp) |
| Transmission | Variable Speed Direct Drive Gearbox |
| Blade Speed Range | 0mtr/min - 90mtr/min |
| Blade Size | 2450mm x 27mm x 0.9mm |
| ITEM NO | 01597 |
|---|---|
| Input Supply | 3-PHASE 400v (5A) |
| Motor Power | 2hp (1.5kW) |
| Operating Speed | 4 speeds |
| Speed Range | 29 / 50 / 73 / 95mtr/min |
| Input Supply | 400v 3-PHASE |
|---|---|
| Motor Power | 1.5kW (2hp) |
| Transmission | 2-Speed Direct Drive Gearbox |
| Blade Speed Range | 34mtr/min / 68mtr/min |
| Blade Size | 3160mm x 27mm x 0.9mm |
| ITEM NO. | 01307 |
|---|---|
| Input Voltage | 230v (13A) |
| Motor Power | 2300w |
| Motor Speed | 3800rpm |
| Abrasive Disc Size | Ø 14" (355mm) |
| ITEM NO | 01599 |
|---|---|
| Input Supply | 230v (13A) |
| Motor Power | 2hp (1.5kW) |
| Operating Speed | 4 speeds |
| Speed Range | 29 / 50 / 73 / 95mtr/min |
By sharing your email, you agree to our privacy policy & terms of service
Cart
POPULAR CATEGORY
