Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

Brands

FAQs

Match the JASO classification to the engine manufacturer's recommendation, normally printed on the fuel cap or in the operator manual. JASO FB is the basic mineral grade; JASO FC adds smoke-reduction (used in modern emissions-controlled engines); JASO FD is the highest grade with cleaner burn and reduced exhaust deposits. Use the manufacturer's mix ratio (commonly 50:1 for modern engines, 25:1 or 32:1 for older two-strokes) — over-oiling causes carbon buildup, under-oiling causes engine seizure. The JASO classification is listed on every two-stroke oil product page.

Biodegradable bar-and-chain oil is required (or strongly recommended) for forestry work near watercourses, woodland, and conservation areas — it breaks down naturally and reduces environmental contamination. Mineral bar oils are cheaper and have better cold-weather flow but persist in the environment. For most professional UK forestry operations, biodegradable is now standard; for occasional domestic use, mineral oil is acceptable. Check site-specific environmental requirements before choosing.

ISO VG hydraulic oils are formulated for hydraulic systems — clean, anti-wear, anti-foam, with good shear stability for pump and valve work. Way-and-slide oils are formulated for the slideways on machine tools (lathes, mills, grinders) — adhesive properties to keep the oil on vertical and inclined slides under sliding load, and tackifiers to resist wash-off by coolant. Using hydraulic oil on slideways causes premature slide wear; using slide oil in hydraulic systems causes pump and valve issues. Match the oil to the application.

Yes. NSF H1-registered food-grade lubricants — including chain oils, gear oils, hydraulic fluids, and greases — are available for use in food-production lines where incidental contact with food is possible. Look for the NSF H1 registration on the product page. NSF H2 (no possible food contact) and NSF 3H (release agent) classifications are also available for the relevant applications. WhatsApp 07754288583 with the application details if you need help selecting the right grade.

Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Other Oil

FilterFilters
View as Grid List

Within Plant & Agriculture / Oil, Other Oil covers the specialist and ancillary oils that fall outside the main engine, hydraulic, and gear-oil categories — including chainsaw and bar-oil products, two-stroke oils, compressor oils, way-and-slide oils used on machine tools, food-grade lubricants, and the niche application-specific oils used across plant and agricultural operations. Parts For Machines supplies the wide selection of specialist oils for plant fleets, agricultural-equipment operators, and industrial-machinery workshops.

Parts For Machines is an Authorised Distributor and Seller of Shell, Castrol, and Q8 across the specialist-oil range. Shell covers the broadest selection in this category — including Tellus and Omala lines for industrial use, two-stroke and chainsaw oils for forestry equipment, and food-grade variants where contact with food production lines is a possibility. Castrol covers the EDGE and Magnatec ranges adapted for specialist applications, plus Castrol Greases for chassis and bearing use.

Q8 covers heavy-duty mineral and synthetic specialist oils used widely in plant-fleet maintenance. Product pages list the SAE viscosity grade (where applicable), the relevant industry specification (ISO VG number for industrial oils, JASO classification for two-stroke oils, NLGI grade for greases), the OEM approvals (where the oil is approved against a manufacturer specification), the recommended operating-temperature range, and the pack size — typically 1-litre, 5-litre, 20-litre drums, with 208-litre barrels available on volume. For chainsaw and forestry use, choose biodegradable bar-and-chain oils where required by the operating environment (woodland and water-edge work) or standard mineral bar-oils for general use.

For two-stroke oils, match the JASO classification (FB, FC, FD) to the engine manufacturer's recommendation — typically printed on the engine cap or in the operator manual. Trade pricing on bulk and barrel orders is available; contact the team via WhatsApp 07754288583 for a quote on volume requirements.

Show Only My Country Products
In this feature, you can view only your country products.
  • Shell - Corena S3 R 46, Compressor Oil - 20Litre

    Shell - Corena S3 R 46, Compressor Oil - 20Litre

    SO Viscosity Grade 46
    Kinematic Viscosity @40°C 46 mm²/s
    Kinematic Viscosity @100°C 6.9 mm²/s
    Density @15°C 868 kg/m³
    Flash Point (COC) 230 °C
    £117.25 £114.95
    2% OFF
    ADD Add to cart Add to cart
  • Shell 550026559 Corena S3 R 46, Compressor Oil - 20 Litre

    Shell 550026559 Corena S3 R 46, Compressor Oil - 20 Litre

    ISO Viscosity Grade 46
    Kinematic Viscosity@40°C 46 mm²/s
    Kinematic Viscosity@100°C 6.9 mm²/s
    Viscosity Index 105
    Density@15°C 868 kg/m³
    £153.97 £150.95
    2% OFF
    ADD Add to cart Add to cart
    Free delivery in UK Mainland
  • Shell 550026293 Corena S2 P 68, Compressor Oil - 20 Litre

    Shell 550026293 Corena S2 P 68, Compressor Oil - 20 Litre

    ISO Viscosity Grade ISO 3448 68
    Kinematic Viscosity @40°C ASTM D445 68 mm2/s
    Kinematic Viscosity @100°C ASTM D445 7.8mm2/s
    Density @15°C ASTM D1298 883 kg/m3
    Flash Point (COC) ASTM D92 195°C minimum
    £160.61 £157.46
    2% OFF
    ADD Add to cart Add to cart
    Free delivery in UK Mainland
  • Shell 550065677 Corena S2 P 150, Compressor Oil - 20 Litre

    Shell 550065677 Corena S2 P 150, Compressor Oil - 20 Litre

    ISO Viscosity Grade ISO 3448 150
    Kinematic Viscosity @40°C ASTM D445 155 mm²/s
    Kinematic Viscosity @100°C ASTM D445 12.1 mm²/s
    Density @15°C ASTM D1298 902 kg/m3
    Flash Point (COC) ASTM D92 210 °C minimum
    £173.60 £170.20
    2% OFF
    ADD Add to cart Add to cart
    Free delivery in UK Mainland
  • Shell 550027231 Corena S3 R 68, Compressor Oil - 20 Litre

    Shell 550027231 Corena S3 R 68, Compressor Oil - 20 Litre

    ISO Viscosity Grade 68
    Kinematic Viscosity@40°C 68 mm²/s
    Kinematic Viscosity@100°C 8.9 mm²/s
    Viscosity Index 104
    Density@15°C 873 kg/m³
    £178.81 £175.30
    2% OFF
    ADD Add to cart Add to cart
    Free delivery in UK Mainland
  • Shell 550027265 Corena S4 P 100, Compressor Oil - 20 Litre

    Shell 550027265 Corena S4 P 100, Compressor Oil - 20 Litre

    ISO Viscosity Grade ISO 3448 100
    Performance Standard DIN 51506 VDL 100
    Kinematic Viscosity @40°C ASTM D445 100 mm2/s
    Kinematic Viscosity @100°C ASTM D445 10.2mm2/s
    Density @15°C ASTM D1298 988kg/m3
    £339.13 £332.48
    2% OFF
    ADD Add to cart Add to cart
    Free delivery in UK Mainland
  • Shell 550027229 Corena S4 P 68, Compressor Oil - 20 Litre

    Shell 550027229 Corena S4 P 68, Compressor Oil - 20 Litre

    ISO Viscosity Grade ISO 3448 68
    Performance Standard DIN 51506 DL 68
    Kinematic Viscosity @40°C ASTM D445 68mm2/s
    Kinematic Viscosity @100°C ASTM D445 8.5mm2/s
    Density @15°C ASTM D1298 990kg/m3
    £339.13 £332.48
    2% OFF
    ADD Add to cart Add to cart
    Free delivery in UK Mainland
  • Shell 550026196 Corena S2 P 100, Compressor Oil - 209 Litre

    Shell 550026196 Corena S2 P 100, Compressor Oil - 209 Litre

    ISO Viscosity Grade ISO 3448 100
    Kinematic Viscosity @40°C ASTM D445 100 mm2/s
    Kinematic Viscosity @100°C ASTM D445 9.2 mm2/s
    Density @15°C ASTM D1298 899kg/m3
    Flash Point (COC) ASTM D92 205 °C minimum
    £1,403.66 £1,376.14
    2% OFF
    ADD Add to cart Add to cart
    Free delivery in UK Mainland
  • Shell 550026561 Corena S3 R 46, Compressor Oil - 209 Litre

    Shell 550026561 Corena S3 R 46, Compressor Oil - 209 Litre

    ISO Viscosity Grade : 46 Kinematic Viscosity@40°C : 46 mm²/s Kinematic Viscosity@100°C : 6.9 mm²/s Viscosity Index : 105 Density@15°C : 868 kg/m³ Flash Point (COC) : 230°C Air Release : 3 minutes RPVOT : 700 minutes FZG Test : 11 LS Fail Pour Point : -30°C Water Separability@54°C : 15 minutes
    £1,584.78 £1,553.71
    2% OFF
    ADD Add to cart Add to cart
    Free delivery in UK Mainland
  • Shell 550026384 Corena S2 P 150, Compressor Oil - 209 Litre

    Shell 550026384 Corena S2 P 150, Compressor Oil - 209 Litre

    ISO Viscosity Grade ISO 3448 150
    Kinematic Viscosity @40°C ASTM D445 155 mm²/s
    Kinematic Viscosity @100°C ASTM D445 12.1 mm²/s
    Density @15°C ASTM D1298 902 kg/m3
    Flash Point (COC) ASTM D92 210 °C minimum
    £1,723.64 £1,689.84
    2% OFF
    ADD Add to cart Add to cart
    Free delivery in UK Mainland
  • Shell 550026560 Corena S3 R 68, Compressor Oil - 209 Litre

    Shell 550026560 Corena S3 R 68, Compressor Oil - 209 Litre

    ISO Viscosity Grade : 68 Kinematic Viscosity@40°C : 68 mm²/s Kinematic Viscosity@100°C : 8.9 mm²/s Viscosity Index : 104 Density@15°C : 873 kg/m³ Flash Point (COC) : 248°C Air Release : 5 minutes RPVOT : 700 minutes FZG Test : 11 LS Fail Pour Point : -30°C Water separability@54°C : 15 minutes
    £1,777.97 £1,743.11
    2% OFF
    ADD Add to cart Add to cart
    Free delivery in UK Mainland
  • Shell 550026202 Corena S4 R 46, Compressor Oil - 209 Litre

    Shell 550026202 Corena S4 R 46, Compressor Oil - 209 Litre

    ISO Viscosity Grade ISO 3448 46
    Kinematic Viscosity @40°C ASTM D445 46mm2/s
    Kinematic Viscosity @100°C ASTM D445 7.5mm2/s
    Viscosity Index ISO 2909 135
    Density @15°C ASTM D1298 843kg/m3
    £3,254.08 £3,190.27
    2% OFF
    ADD Add to cart Add to cart
    Free delivery in UK Mainland
  • Shell Demo Product
    Out of Stock

    Shell Demo Product

    Model No AK470DX
    Air Consumption 150L/Min
    Brand Sealey
    Minimum/Maximum Air Pressure 7-8bar
    Nett Weight 76kg
    £10.00
    Pre-Book
    Free delivery in UK Mainland
  • Shell 550026197 Corena S2 P 100, Compressor Oil - 20 Litre
    Out of Stock

    Shell 550026197 Corena S2 P 100, Compressor Oil - 20 Litre

    ISO Viscosity Grade ISO 3448 100
    Kinematic Viscosity @40°C ASTM D445 100 mm2/s
    Kinematic Viscosity @100°C ASTM D445 9.2 mm2/s
    Density @15°C ASTM D1298 899kg/m3
    Flash Point (COC) ASTM D92 205 °C minimum
    £142.98 £140.18
    2% OFF
    Pre-Book
    Free delivery in UK Mainland
  • Shell 550026204 Corena S4 R 46, Compressor Oil - 20 Litre
    Out of Stock

    Shell 550026204 Corena S4 R 46, Compressor Oil - 20 Litre

    ISO Viscosity Grade ISO 3448 46
    Kinematic Viscosity @40°C ASTM D445 46mm2/s
    Kinematic Viscosity @100°C ASTM D445 7.5mm2/s
    Viscosity Index ISO 2909 135
    Density @15°C ASTM D1298 843kg/m3
    £410.30 £402.25
    2% OFF
    Pre-Book
    Free delivery in UK Mainland
  • Shell 550026195 Corena S2 P 68, Compressor Oil - 209 Litre
    Out of Stock

    Shell 550026195 Corena S2 P 68, Compressor Oil - 209 Litre

    ISO Viscosity Grade ISO 3448 68
    Kinematic Viscosity @40°C ASTM D445 68 mm2/s
    Kinematic Viscosity @100°C ASTM D445 7.8mm2/s
    Density @15°C ASTM D1298 883 kg/m3
    Flash Point (COC) ASTM D92 195°C minimum
    £1,587.80 £1,556.67
    2% OFF
    Pre-Book
    Free delivery in UK Mainland
  • Shell - Corena S4 P 68, Compressor Oil - 209 Litre
    Out of Stock

    Shell - Corena S4 P 68, Compressor Oil - 209 Litre

    ISO Viscosity Grade ISO 3448 68
    Performance Standard DIN 51506 DL 68
    Kinematic Viscosity @40°C ASTM D445 68mm2/s
    Kinematic Viscosity @100°C ASTM D445 8.5mm2/s
    Density @15°C ASTM D1298 990kg/m3
    £3,665.04 £3,593.18
    2% OFF
    Pre-Book
    Free delivery in UK Mainland
Showing 1 to 17 of 17 entries
FAQs

Match the JASO classification to the engine manufacturer's recommendation, normally printed on the fuel cap or in the operator manual. JASO FB is the basic mineral grade; JASO FC adds smoke-reduction (used in modern emissions-controlled engines); JASO FD is the highest grade with cleaner burn and reduced exhaust deposits. Use the manufacturer's mix ratio (commonly 50:1 for modern engines, 25:1 or 32:1 for older two-strokes) — over-oiling causes carbon buildup, under-oiling causes engine seizure. The JASO classification is listed on every two-stroke oil product page.

Biodegradable bar-and-chain oil is required (or strongly recommended) for forestry work near watercourses, woodland, and conservation areas — it breaks down naturally and reduces environmental contamination. Mineral bar oils are cheaper and have better cold-weather flow but persist in the environment. For most professional UK forestry operations, biodegradable is now standard; for occasional domestic use, mineral oil is acceptable. Check site-specific environmental requirements before choosing.

ISO VG hydraulic oils are formulated for hydraulic systems — clean, anti-wear, anti-foam, with good shear stability for pump and valve work. Way-and-slide oils are formulated for the slideways on machine tools (lathes, mills, grinders) — adhesive properties to keep the oil on vertical and inclined slides under sliding load, and tackifiers to resist wash-off by coolant. Using hydraulic oil on slideways causes premature slide wear; using slide oil in hydraulic systems causes pump and valve issues. Match the oil to the application.

Yes. NSF H1-registered food-grade lubricants — including chain oils, gear oils, hydraulic fluids, and greases — are available for use in food-production lines where incidental contact with food is possible. Look for the NSF H1 registration on the product page. NSF H2 (no possible food contact) and NSF 3H (release agent) classifications are also available for the relevant applications. WhatsApp 07754288583 with the application details if you need help selecting the right grade.

Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service