Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Treatment works, pump fleets and boatyards buy stainless clips by the box because everything plated eventually seizes around water.
The HGS160BP is a Hi-Grip worm drive clip adjusting between 130-160mm. Its band edges are fully rounded to protect the hose, and the hex screw is cold-headed and work-hardened with rolled threads, so it resists slipping or rounding under the driver. Tighten incrementally to the recommended 6.0 Nm (54 lb-in); over-tightening is what damages hoses. The range is manufactured to exceed BS5315 and carries the BSI Kitemark and NATO approval.
At 10 clips per box this is the standardisation format for treatment works, boatyards and pump engineers. Specification: 304 stainless (EN 1.4301) throughout, verified by salt mist testing, Lloyd's Register Type Approved. Size each joint by the fitted outside diameter of the hose and tighten in stages to the recommended torque.
Also available - the same clip as a trade bag (HGS160BG); the 110-140mm size (HGS140BP); the 150-180mm size (HGS180BP); a zinc plated version in the same size and pack (HGZ160BP).
Lloyd's Register Type Approval on a stocked bulk pack is rare at any price point.
| Adjustment Range | 130-160mm (approx 5 1/8 - 6 5/16 in) |
|---|---|
| Material | 304 stainless steel 18/8 (EN 1.4301), all components stainless |
| Type | Worm drive |
| Recommended Torque | 6.0 Nm (54 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Approval | Lloyd's Register Type Approval (marine, offshore, industrial) |
| Applications | Marine, offshore & industrial (Lloyd's Register Type Approved); pumping, stormwater & wastewater systems; agricultural irrigation networks (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | HGS160BG | HGZ160BP | HGS140BG | HGS100BP | HGS90BP |
| Material | Stainless steel | Mild steel zinc plated | Stainless steel | Stainless steel | Stainless steel |
| Clamping Range | 130-160mm | 130-160mm | 110-140mm | 80-100mm | 70-90mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size | Single size |
| Grade | 304 | 304 | 304 | 304 | |
| Pack Qty | 10 | 10 | 10 | 5 | 5 |
A. This size spans 130-160mm of fitted hose outside diameter. Measure the hose over its fitting, not the bare bore - anywhere inside 130-160mm and the HGS160BP is the right clip. One JCS size covers a span that would take two fixed nut-and-bolt clamps. In imperial terms that is roughly 5 1/8 to 6 5/16 in, covering common 6 in hose sizes.
A. For this size band JCS publishes a recommended torque of 6.0 Nm (54 lb-in). Work up to it gradually with the clip seated centrally on the barb; going past it risks damaging the hose rather than improving the seal.
A. No mixed metals here - band, housing and screw are all the same stainless grade, and JCS verifies that through salt mist testing. Cheaper clips often pair a stainless band with a plated screw, which is the part that fails first.
A. Yes - JCS stainless hose clips are used across water and drainage infrastructure, including pumping solutions, stormwater and overflow management, wastewater treatment and agricultural irrigation networks.
A. Hi-Grip 304 stainless is marine-quality 18/8 steel with Lloyd's Register Type Approval and is suited to saltwater service. JCS also makes a 316 grade for maximum corrosion resistance in the most demanding marine, offshore, food and pharmaceutical settings - contact us if your application is in that category.
A. The screw is cold-headed and work-hardened with a sharply defined hexagon and rolled threads to resist slipping and rounding. For high-vibration applications JCS recommends rechecking the clip after use to maintain seal integrity.
A. This is a pack of 10 clips, all 130-160mm adjustment range. Other pack formats of the same clip are listed separately.
A. WhatsApp us on 07754 288583 with photos of the item and packaging.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
