Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Large-diameter wet-side hoses - pump deliveries, drainage runs, washdown mains - need clips that stay serviceable for years, not seasons.
The HGS240BP is a Hi-Grip worm drive clip adjusting between 210-240mm. Its band edges are fully rounded to protect the hose, and the hex screw is cold-headed and work-hardened with rolled threads, so it resists slipping or rounding under the driver. Tighten incrementally to the recommended 6.0 Nm (54 lb-in); over-tightening is what damages hoses. The range is manufactured to exceed BS5315 and carries the BSI Kitemark and NATO approval.
At 10 clips per box this is the standardisation format for treatment works, boatyards and pump engineers. Specification: 304 stainless (EN 1.4301) throughout, verified by salt mist testing, Lloyd's Register Type Approved. Size each joint by the fitted outside diameter of the hose and tighten in stages to the recommended torque.
Also available - the 190-220mm size (HGS220BP); the 230-260mm size (HGS260BP); a zinc plated version in the same size and pack (HGZ240BP).
An industry-standard marine clip, sized by honest adjustment ranges and backed by over 180 years of British manufacturing.
| Adjustment Range | 210-240mm (approx 8 1/4 - 9 7/16 in) |
|---|---|
| Material | 304 stainless steel 18/8 (EN 1.4301), all components stainless |
| Type | Worm drive |
| Recommended Torque | 6.0 Nm (54 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Approval | Lloyd's Register Type Approval (marine, offshore, industrial) |
| Applications | Marine, offshore & industrial (Lloyd's Register Type Approved); pumping, stormwater & wastewater systems; agricultural irrigation networks (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||
| Technical Specification | |||
|---|---|---|---|
| PRODUCT NUMBER | HGS220BP | HGS260BP | HGZ240BP |
| Material | Stainless steel | Stainless steel | Mild steel zinc plated |
| Clamping Range | 190-220mm | 230-260mm | 210-240mm |
| Clip Type | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size |
| Grade | 304 | 304 | |
| Pack Qty | 10 | 10 | 10 |
A. This size spans 210-240mm of fitted hose outside diameter. Measure the hose over its fitting, not the bare bore - anywhere inside 210-240mm and the HGS240BP is the right clip. One JCS size covers a span that would take two fixed nut-and-bolt clamps.
A. JCS recommends 6.0 Nm (54 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. Yes. It is made from 18/8 marine-quality 304 stainless steel and holds Lloyd's Register Type Approval for marine, offshore and industrial use - JCS describes it as ideal for salt water and other highly corrosive environments.
A. Yes - every component is the same grade of stainless steel, verified through JCS's salt mist testing, so there is no mixed-metal weak point to corrode first.
A. That is one of their core applications: JCS stainless clips serve temporary and permanent pumping, stormwater and overflow systems, wastewater treatment works, and agricultural irrigation networks, where corrosion resistance decides service life.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 10 clips, all 210-240mm adjustment range. Other pack formats of the same clip are listed separately.
A. Every product comes with a different guarantee and warranty. Warranty details are shown in the product's tech specs or datasheet where available.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
