Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Soft hoses relax over time; a clip that cannot be re-tensioned simply lets the seal fade with them.
The HGZ160BP is a Hi-Grip worm drive clip adjusting between 130-160mm. Its band edges are fully rounded to protect the hose, and the hex screw is cold-headed and work-hardened with rolled threads, so it resists slipping or rounding under the driver. Tighten incrementally to the recommended 6.0 Nm (54 lb-in); over-tightening is what damages hoses. The range is manufactured to exceed BS5315 and carries the BSI Kitemark and NATO approval.
This is trade depth in one box - 10 clips of one size, zinc plated and passivated over mild steel with the plating applied after cutting. Intended for non-corrosive domestic, automotive and industrial service; for wet or salty duty JCS points buyers to its stainless range. One Hi-Grip covers a wider span than a typical nut-and-bolt clamp, so fewer bins cover more hoses.
Also available - the same clip as a trade bag (HGZ160BG); the 110-140mm size (HGZ140BP); the 150-180mm size (HGZ180BP); a 304 stainless version in the same size and pack (HGS160BP).
Few clips at this level carry a Kitemark, NATO approval and 180-plus years of British manufacturing behind them.
| Adjustment Range | 130-160mm (approx 5 1/8 - 6 5/16 in) |
|---|---|
| Material | Zinc plated mild steel (passivated, EN9227 tested) |
| Type | Worm drive |
| Recommended Torque | 6.0 Nm (54 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Applications | Domestic, automotive & industrial hose connections; used across the automotive sector and by leading agricultural machinery manufacturers (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | HGZ160BG | HGS160BP | HGZ140BG | HGZ120BG | HGZ100BG |
| Material | Mild steel zinc plated | Stainless steel | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated |
| Clamping Range | 130-160mm | 130-160mm | 110-140mm | 90-120mm | 80-100mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size | Single size |
| Grade | 304 | ||||
| Pack Qty | 10 | 10 | 10 | 10 | 10 |
A. This size spans 130-160mm of fitted hose outside diameter. Measure the hose over its fitting, not the bare bore - anywhere inside 130-160mm and the HGZ160BP is the right clip. One JCS size covers a span that would take two fixed nut-and-bolt clamps. In imperial terms that is roughly 5 1/8 to 6 5/16 in, covering common 6 in hose sizes.
A. JCS recommends 6.0 Nm (54 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. The band is heavily electro zinc plated and passivated, tested to EN9227, and JCS plates the steel after cutting so the cut edges are coated too. It is intended for non-corrosive environments such as domestic and light industrial use - for wet, salty or chemical-exposed duty choose the Hi-Grip Stainless version.
A. No - JCS itself cautions that zinc-coated clamps can quickly corrode or seize around salt water. The marine specification is Hi-Grip Stainless: 18/8 304 stainless throughout, with Lloyd's Register Type Approval.
A. Anywhere a flexible hose seals onto a rigid fitting in dry or general conditions - vehicles, garden and grounds machinery, air lines, workshop and light industrial pipework. JCS supplies the automotive sector and leading agricultural machinery manufacturers.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 10 clips, all 130-160mm adjustment range. Other pack formats of the same clip are listed separately.
A. We accept all major credit and debit cards, along with PayPal.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
