Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGS220BP
Wet environments are where standard hose clips quietly fail - corrosion locks the screw, pits the band and ends any chance of re-tensioning the joint.
Sized to adjust between 190-220mm, the HGS220BP carries the construction details Hi-Grip is specified for - rolled screw threads on a cold-headed, work-hardened hex head, fully rounded band edges, and a published tightening torque of 6.0 Nm (54 lb-in) for this size band. The range is made to exceed BS5315 and holds the BSI Kitemark and NATO approval.
Packed 10 to a box for stores and fleet use, the clip is 18/8 marine-quality 304 stainless in every part - band, housing and screw - so there is no plated component to corrode first. Lloyd's Register Type Approval covers marine, offshore and industrial duty; the same clips serve agricultural irrigation, washdown plant and drainage systems.
Also available - the 170-200mm size (HGS200BP); the 210-240mm size (HGS240BP); a zinc plated version in the same size and pack (HGZ220BP).
An industry-standard marine clip, sized by honest adjustment ranges and backed by over 180 years of British manufacturing.
| Adjustment Range | 190-220mm (approx 7 1/2 - 8 11/16 in) |
|---|---|
| Material | 304 stainless steel 18/8 (EN 1.4301), all components stainless |
| Type | Worm drive |
| Recommended Torque | 6.0 Nm (54 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Approval | Lloyd's Register Type Approval (marine, offshore, industrial) |
| Applications | Marine, offshore & industrial (Lloyd's Register Type Approved); pumping, stormwater & wastewater systems; agricultural irrigation networks (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||
| Technical Specification | |||
|---|---|---|---|
| PRODUCT NUMBER | HGS200BP | HGS240BP | HGZ220BP |
| Material | Stainless steel | Stainless steel | Mild steel zinc plated |
| Clamping Range | 170-200mm | 210-240mm | 190-220mm |
| Clip Type | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size |
| Grade | 304 | 304 | |
| Pack Qty | 10 | 10 | 10 |
A. This size spans 190-220mm of fitted hose outside diameter. Measure the hose over its fitting, not the bare bore - anywhere inside 190-220mm and the HGS220BP is the right clip. One JCS size covers a span that would take two fixed nut-and-bolt clamps.
A. JCS recommends 6.0 Nm (54 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. Yes. It is made from 18/8 marine-quality 304 stainless steel and holds Lloyd's Register Type Approval for marine, offshore and industrial use - JCS describes it as ideal for salt water and other highly corrosive environments.
A. Yes - every component is the same grade of stainless steel, verified through JCS's salt mist testing, so there is no mixed-metal weak point to corrode first.
A. Yes - JCS stainless hose clips are used across water and drainage infrastructure, including pumping solutions, stormwater and overflow management, wastewater treatment and agricultural irrigation networks.
A. The screw is cold-headed and work-hardened with a sharply defined hexagon and rolled threads to resist slipping and rounding. For high-vibration applications JCS recommends rechecking the clip after use to maintain seal integrity.
A. This is a pack of 10 clips, all 190-220mm adjustment range. Other pack formats of the same clip are listed separately.
A. We accept all major credit and debit cards, along with PayPal.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
