Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Large-bore hose joints carry more flow and more consequence - the clip sealing them is no place to economise.
This is the 150-180mm size of the Hi-Grip worm drive range. Where cheaper clips cut their threads and leave sharp band edges, JCS rolls the screw threads for strength and fully rounds the band edges so the hose is protected as the clip bites. JCS publishes a recommended torque of 6.0 Nm (54 lb-in) for this size - seat the clip centrally on the barb and work up to it gradually. Hi-Grip exceeds BS5315 and holds BSI Kitemark and NATO approvals.
Made from heavily electro zinc plated and passivated mild steel, tested to EN9227, it suits general purpose work in non-corrosive environments. The 10-clip bulk format suits maintenance teams and assemblers fitting the same size daily. Measure the fitted outside diameter of the hose, seat the clip centrally on the barb, and recheck after sustained vibration.
Also available - the 130-160mm size (HGZ160BP); the 170-200mm size (HGZ200BP); a 304 stainless version in the same size and pack (HGS180BP).
Few clips at this level carry a Kitemark, NATO approval and 180-plus years of British manufacturing behind them.
| Adjustment Range | 150-180mm (approx 5 7/8 - 7 1/16 in) |
|---|---|
| Material | Zinc plated mild steel (passivated, EN9227 tested) |
| Type | Worm drive |
| Recommended Torque | 6.0 Nm (54 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Applications | Domestic, automotive & industrial hose connections; used across the automotive sector and by leading agricultural machinery manufacturers (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | HGS180BP | HGZ160BG | HGZ140BG | HGZ120BG | HGZ280BP |
| Material | Stainless steel | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated |
| Clamping Range | 150-180mm | 130-160mm | 110-140mm | 90-120mm | 250-280mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size | Single size |
| Grade | 304 | ||||
| Pack Qty | 10 | 10 | 10 | 10 | 5 |
A. It adjusts between 150-180mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 150-180mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 5 7/8 to 7 1/16 in, covering common 6 in hose sizes.
A. JCS recommends 6.0 Nm (54 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. The band is heavily electro zinc plated and passivated, tested to EN9227, and JCS plates the steel after cutting so the cut edges are coated too. It is intended for non-corrosive environments such as domestic and light industrial use - for wet, salty or chemical-exposed duty choose the Hi-Grip Stainless version.
A. JCS advises against zinc plated clips in marine conditions, where they can corrode or seize. For boats and other saltwater environments use Hi-Grip Stainless, which is 18/8 marine-quality 304 stainless steel with Lloyd's Register Type Approval.
A. Anywhere a flexible hose seals onto a rigid fitting in dry or general conditions - vehicles, garden and grounds machinery, air lines, workshop and light industrial pipework. JCS supplies the automotive sector and leading agricultural machinery manufacturers.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 10 clips, all 150-180mm adjustment range. Other pack formats of the same clip are listed separately.
A. We accept all major credit and debit cards, along with PayPal.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
