Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £5.49 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 1515MM12-70
Variations
Holding firmly where lighter grades would yield, the 1515MM12-70 is a male-male bobbin anti-vibration mount rated to a maximum load of 15.0 kg with a deflection of just 1.3 mm, the stiffest option in the 15x15mm M6 family and the right choice when controlled movement under load matters most. At 15 mm diameter by 15 mm height with M6 x 12 mm threaded studs on both faces, this compact rubber-to-metal bonded unit is specified where shock and impact must be resisted and the mounted component must be held with minimal give. The 70 Shore A rubber hardness grade prioritises load capacity and movement restraint over isolation sensitivity. Where softer grades absorb vibration through greater deflection, this firm-grade mount limits travel to 1.3 mm under its full 15.0 kg rated load, making it suited to heavier-duty compact installations and applications where looseness or excessive movement cannot be tolerated. The bonded rubber-to-metal construction delivers structural integrity across shear, compression and combined loading orientations. Typical applications for a stiff, small-format bobbin of this grade include securing diesel engines in compact enclosures, restraining exhaust mountings subject to impulse loads, stabilising small generator sets and supporting industrial instruments or equipment where vibration control must not compromise positional rigidity. The mount is also used across construction and off-highway, agricultural, marine and automotive installations where a compact, firm-grade isolator is required. Custom sizes, stainless steel hardware and oil-resistant or high-temperature rubber formulations are available on request.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 70 |
|---|---|
| Body diameter D (mm) | 15 |
| Overall height H (mm) | 15 |
| Stud thread d | M6 |
| Stud length L (mm) | 12 |
| Max load (kg) | 15 |
| Deflection (mm) | 1.3 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £5.49
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 2522MM20-45 | 1515MF10-70 | 3030MF20-45 | 3035FF08-45 | 2015FF06-60 |
| Type | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount |
| Length | 22mm | 15mm | 30mm | 35mm | |
| Height | 15mm | ||||
| Size | 25x22mm | 15x15mm | 30x30mm | 30x35mm | 20x15mm |
| Deflection | 1.8 | 1.3 | 2.6 | 3.1 | 1 |
| Diameter | 25mm | 15mm | 30mm | 30mm | |
| Diameter Range | 11-25mm | 11-25mm | 26-50mm | 26-50mm | |
| Length Range | 11-25mm | 11-25mm | 26-50mm | 26-50mm | |
| Shore Hardness | 45 | 70 | 45 | 45 | |
| Thread | M8 | M4 | M8 | M8 | M6 |
| Show More | |||||
A. The 1515MM12-70 is rated to a maximum load of 15.0 kg with a deflection of 1.3 mm. These figures reflect the 70 Shore A hardness grade, which carries load with minimal movement compared with softer grades in the same geometry.
A. The 15x15mm denotes the body diameter by height (D x H) in millimetres. M6 x 12 refers to the metric thread size and stud length (d x L) on each male face of the bobbin.
A. The firm 70 Shore A grade is suited to applications where the mounted component must be held with minimal deflection under load — for example, diesel engines in compact enclosures, exhaust mountings subject to impulse forces, small generator sets and industrial instruments or equipment requiring positional rigidity alongside vibration control.
A. Yes. The rubber-to-metal bonded construction of this bobbin mount allows use in shear, compression or a combination of both loading orientations, as stated in the product source data.
A. Yes. The 15x15mm M6 configuration is also available in 45 Shore A (1515MM12-45) and 60 Shore A (1515MM12-60). The wider range includes 0808MM06, 100100MM44, 10030MM44, 10040MM44, 10050MM44 and 10055MM44. Custom sizes, stainless steel hardware and specialist rubber formulations are available on request.
A. Yes. Oil-resistant and high-temperature rubber formulations, stainless steel metal components, and additional or custom sizes are available on request for the bobbin mount range.
A. WhatsApp us on 07754 288583 with photos of the item and packaging, and we will resolve the issue in line with our returns policy.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
