Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

By load into the band: TVAR hangers state minimum and maximum, 8 to 75 kilograms across the range, and the suspended weight per hanger must land between them, with M6 or M10 fixings to suit.

Because rubber only isolates when it deflects: a hanger loaded under its minimum hangs stiff and passes vibration straight into the structure, so the band is matched, not just the ceiling.

The rod-sized family: 12 and 16 millimetre forms picked by the hanging rod they serve, covering the runs the load-banded TVAR forms do not.

Enough that each carries its share within band: the run's weight divided by hangers gives the per-hanger load, and a photo of the run over WhatsApp gets the arithmetic done.

Clear

Rubber Hangers & Exhaust Mountings

FilterFilters
View as Grid List

A hanger isolates from above: pipework, ducting and exhausts hang from it rather than sit on it, and the rubber in the hanger keeps their vibration out of the structure overhead. Sixteen hangers cover the duty in two families, picked by load and by rod size.

The TVAR hangers carry stated minimum and maximum loads, 8 to 25 kilograms, 18 to 50 and 25 to 75 across the range, each offered with M6 or M10 fixings, and the minimum matters as much as the maximum: a hanger loaded below its minimum barely deflects and passes vibration straight up, so suspended weight is matched into the band, not just under the ceiling of it.

The TM hangers pick by rod size instead, 12 and 16 millimetre forms, and both families do the exhaust duty the shelf is named for, holding hot moving pipework flexibly clear of the structure.

Load or rod size typed into search picks the hanger, and the suspended weight with a photo over WhatsApp on 07754288583 comes back with the arithmetic done.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 16 of 16 entries
FAQs

By load into the band: TVAR hangers state minimum and maximum, 8 to 75 kilograms across the range, and the suspended weight per hanger must land between them, with M6 or M10 fixings to suit.

Because rubber only isolates when it deflects: a hanger loaded under its minimum hangs stiff and passes vibration straight into the structure, so the band is matched, not just the ceiling.

The rod-sized family: 12 and 16 millimetre forms picked by the hanging rod they serve, covering the runs the load-banded TVAR forms do not.

Enough that each carries its share within band: the run's weight divided by hangers gives the per-hanger load, and a photo of the run over WhatsApp gets the arithmetic done.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service