Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 10055FF16-60
Variations
Rated to a maximum load of 520 kg with a controlled deflection of just 4.7 mm, the Female-Female Bobbin Mount 10055FF16-60 is the largest 100 x 55 mm, M16-threaded entry in this Shore A graded range, engineered for heavier plant, high-load machinery, and applications where shock attenuation must be balanced against firm positional control. The 60 Shore A medium-hardness rubber delivers the practical middle ground between compliance and rigidity: enough give to attenuate vibration effectively across a wide frequency band, while the limited deflection figure keeps mounted assemblies stable under sustained or intermittent loading. Rubber-to-metal bonded construction integrates the elastomer directly with the steel bobbin body, eliminating slip at the bond interface and ensuring consistent load transfer in service. The female-female thread configuration accepts M16 fasteners at both ends, allowing direct bolted installation into fabricated frames, base plates, or structural brackets without intermediate hardware. The mount may be loaded in shear, compression, or a combination of both, extending its suitability across varied mounting geometries. This balance of isolation and support makes the 60 Shore grade the natural choice for the broad middle ground of machinery mounting where neither the maximum compliance of a softer rubber nor the near-rigid restraint of a firm grade is appropriate. Typical service environments include generator sets, diesel engines, industrial machinery and equipment, air-conditioning units, and exhaust mountings. Industries served span power generation, agriculture, construction and off-highway, marine, automotive, and railway and mass transit.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 60 |
|---|---|
| Body diameter D (mm) | 100 |
| Overall height H (mm) | 55 |
| Fixing thread / bolt size d | M16 |
| Max load (kg) | 520 |
| Deflection (mm) | 4.7 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Anti-Vibration Mount - Male - Male Bobbin Range, M14, Max Load 512Kg - 8030MM35-60
£18.21
£17.85
2% OFF
|
||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 10055MF44-60 | PR1009575-70 | 10075MM44-70 | 10050MM44-60 | 8030MM35-60 |
| Type | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount |
| Length | 55mm | 75mm | 50mm | ||
| Height | 30mm | ||||
| Size | 100x55mm | 100mm | 100x75mm | 100x50mm | 80x30mm |
| Deflection | 4.7 | 6.7 | 4.2 | 2.4 | |
| Diameter | 100mm | 100mm | 100mm | ||
| Diameter Range | 51-100mm | 51-100mm | 51-100mm | ||
| Length Range | 51-100mm | 51-100mm | 26-50mm | ||
| Mount Dimension | 80mm | ||||
| Shore Hardness | 60 | 70 | 70 | 60 | |
| Size Range | 51-100mm | ||||
| Thread | M16 | M16 | M16 | M16 | M14 |
| Show More | |||||
A. This mount is rated to a maximum load of 520 kg, with a corresponding deflection of 4.7 mm under that load.
A. A 60 Shore A hardness grade places this mount in the medium range — it delivers a practical balance between vibration isolation and structural support. It is well suited to generator sets, diesel engines, industrial machinery and equipment, air-conditioning units, and exhaust mountings where neither a very soft nor a very firm rubber is appropriate.
A. The 10055FF16-60 uses an M16 female-female thread configuration, accepting M16 fasteners at both ends for direct bolted installation into frames, base plates, or structural brackets.
A. Yes. This mount may be loaded in shear, compression, or a combination of both, providing flexibility across a range of mounting orientations and geometries.
A. The mount measures 100 mm in diameter by 55 mm in height (D x H: 100 x 55 mm), with an M16 thread.
A. Yes. This 100 x 55 mm M16 geometry is also available in 45 Shore A (10055FF16-45) for greater deflection and softer isolation, and 70 Shore A (10055FF16-70) for higher-load, lower-deflection duty. Additional diameter variants include 10040FF16, 10045FF16, 10050FF16, 10060FF16, 10575FF16, and 100100FF16.
A. Yes. Stainless steel metalwork and oil-resistant or high-temperature rubbers are available on request, as are additional and custom sizes.
A. We accept returns within 30 days of purchase for items that are unused, undamaged, and in their original packaging. Returns are available only for UK-delivered orders and must include proof of purchase. Before returning an item, please contact us at [email protected] to obtain a Return Merchandise Number (RMN).
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
