Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 10040FF16-60
Variations
Carrying a maximum load of 700 kg with a controlled deflection of 3.2 mm, this 100 x 40 mm female-female bobbin mount in 60 Shore A rubber sits at the heavier end of the range, purpose-built for plant and equipment where both robust support and a measured degree of vibration isolation are required simultaneously. The M16 thread configuration and large-diameter footprint make it well suited to high-mass installations where a softer grade would be insufficient but a very firm grade would transmit too much vibration to surrounding structures or operators. Rubber-to-metal bonded construction gives the mount its structural integrity across the three loading modes supported by this geometry: shear, compression, or a combination of both. The medium 60 Shore A compound delivers the broad middle ground between isolation efficiency and load-bearing capability, improving machinery lifespan and protecting adjacent structures from vibration-induced fatigue. Oil-resistant and high-temperature rubber compounds, as well as stainless steel metalwork and custom dimensions, are available on request. Typical applications for this mount span diesel engines, generator sets, industrial machinery, agricultural equipment, and construction and off-highway plant, sectors where high cyclic loading and shock events are routine. It is equally applicable in power generation, marine, railway and mass transit, and military and defence environments where mount failure under sustained heavy duty is not an option. This mount is available in complementary Shore grades, 45 Shore A (10040FF16-45) for lighter loads and greater isolation, and 70 Shore A (10040FF16-70) for maximum load restraint and minimum deflection.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 60 |
|---|---|
| Body diameter D (mm) | 100 |
| Overall height H (mm) | 40 |
| Fixing thread / bolt size d | M16 |
| Max load (kg) | 700 |
| Deflection (mm) | 3.2 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 8030MM35-70 | 10055MM44-70 | PR1009555-70 | 10055FF16-70 | 10060FF16-70 |
| Type | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount |
| Length | 30mm | 55mm | 55mm | 60mm | |
| Size | 80x30mm | 100x55mm | 100mm | 100x55mm | 100x60mm |
| Deflection | 2.4 | 4.7 | 4.7 | 5.2 | |
| Diameter | 80mm | 100mm | 100mm | 100mm | |
| Diameter Range | 51-100mm | 51-100mm | 51-100mm | 51-100mm | |
| Length Range | 26-50mm | 51-100mm | 51-100mm | 51-100mm | |
| Shore Hardness | 70 | 70 | 70 | 70 | 70 |
| Size Range | 51-100mm | ||||
| Thread | M14 | M16 | M16 | M16 | M16 |
| Show More | |||||
A. This mount has a maximum load rating of 700 kg and a controlled deflection of 3.2 mm at that load. Its 60 Shore A rubber compound and 100 x 40 mm dimensions are suited to high-mass machinery requiring both structural support and a degree of vibration isolation.
A. The 10040FF16-60 may be loaded in shear, compression, or a combination of both, giving flexibility in mounting arrangement across a wide range of machinery installations.
A. The mount is suited to diesel engines, generator sets, industrial machinery, agricultural equipment, construction and off-highway plant, marine, railway and mass transit, power generation, and military and defence applications — wherever high cyclic loading or shock duty demands a robust, medium-hardness mount.
A. The 60 Shore A grade offers a balance of vibration isolation and load-bearing capacity across the broad middle ground of machinery mounting. The 45 Shore A variant (10040FF16-45) provides greater deflection and better isolation at lower loads, while the 70 Shore A variant (10040FF16-70) is specified for maximum load restraint and minimum movement under the highest loads.
A. Yes. Oil-resistant and high-temperature rubber compounds, stainless steel metalwork, and additional or custom sizes are available on request.
A. The mount uses an M16 thread and features a female thread on both ends, allowing direct bolted connection to threaded fasteners or studs on both the equipment and the supporting structure.
A. WhatsApp us on 07754 288583 with photos of the item and packaging, and we will resolve the issue in line with our returns policy.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
