Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | FREE | 1 to 2 working days |
| Next Day | £23.94 |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 7 to 10 working days |
Product Number: 05120100
Panel beating and bodywork repair often requires access to areas where a dolly cannot fit — between panels, along inner frame structures, or behind reinforcement members. In these situations a pry spoon takes the place of the dolly, allowing the operator to apply controlled levering force from the rear of the panel without removing surrounding components. The Sykes Pickavant 05120100 Heavy Duty Pry Spoon is specifically designed for separating outer panels from inner frame structures, providing the rigidity and reach required for structural body repair work.
The choice of pry spoon depends on the original contour of the metal, the amount of access available, and the proposed action — whether roughing out a damaged section or final-levelling a repaired area. This heavy-duty profile is intended for the more demanding end of that range, particularly where prying or levering forces are needed rather than light panel manipulation.
Dimensions are 405mm in length and 63mm in width, providing sufficient reach for most outer panel work while keeping the working tip narrow enough to enter restricted access points. The spoon weighs 1.48kg, providing the mass needed for controlled levering without operator fatigue during extended use.
For non-ferrous bodywork, particularly aluminium repair, an alternative variant is available as part number 051201-AL, which is specified for use on aluminium panels where ferrous tooling could cause contamination or galvanic damage.
Sykes Pickavant has been supplying professional bodyshop and panel beating tools for decades, and the 05120100 reflects the brand's focus on solid, fit-for-purpose tools for structural body repair.
Additional Information
Spoons are used for bumping and prying and can also be used instead of a dolly when direct access to the rear of a panel is obstructed. The choice of spoon depends on the original contour of the metal, the amount of access available and the proposed action (i.e. roughing or levelling). For prying, levering and panel beating in areas that are inaccessible to dollies Heavy duty pry spoon specially designed for separating outer panels from the inner frame structure- Length: 405mm- Width: 63mm- Weight: 1.48kgOption also available for use on aluminium - 051201-AL
About PartsForMachines:
PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Product Dimenstions (L x W x H) | 107 x 490 x 60 mm |
|---|---|
| Product Weight | 1.56 Kg |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: UK Mainland Free
Next Day Delivery Available
Delivery Estimate: 1 to 2 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Sykes Pickavant 051201-AL HEAVY DUTY PRY SPOON
£57.74
£56.61
2% OFF
Free delivery in UK Mainland
|
|||||
| Technical Specification | ||||||
|---|---|---|---|---|---|---|
| PRODUCT NUMBER | 051201-AL | 057300-AL | CB58.08 | CB58.07 | CB58.02 | CB58 |
| Type | Spoon | Spoon | Hammer | Hammer | Dolly | Panel Tool |
| Brand | Sealey | Sealey | Sealey | Sealey | ||
| Model No | CB58.08 | CB58.07 | CB58.02 | CB58 | ||
| Weight (kg) | 52 | 60 | 42 | 40 | ||
A. It is a heavy‑duty pry spoon for separating outer vehicle panels from inner frame structures in restricted areas.
A. It reaches areas inaccessible to dollies, allowing prying, levering and controlled panel shaping.
A. It is about 405mm long and 63mm wide, with a robust structure for demanding bodywork.
A. During rough shaping, prying or separating panels where additional leverage is required.
A. Different contours help match original panel shapes, reducing overstretching or unintended creasing.
A. Hold firmly near the mid‑section to balance leverage and control, especially in tight bodywork spaces.
A. Ensure the working edges are smooth and free from burrs that might transfer marks.
A. Store with bodywork tools in a protected rack to keep working faces pristine.
A. Yes, depending on angle and force, it can rough‑shape or refine surfaces.
A. “05120100 heavy duty pry spoon Sykes Pickavant” or similar."
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
