
Save Extra With 1 Offer
A. Shell Gadus S3 Wirerope A is specifically formulated for steel wire ropes — marine wire ropes, crane ropes, mining ropes and other heavy-duty wire-cable applications where water resistance and penetration into the rope structure are required.
A. Yes, Shell Gadus S3 Wirerope A was previously named Shell ROV Cable Grease.
A. Wire ropes require the lubricant to penetrate between the rope strands to lubricate wire-on-wire contact inside the rope. Wire-rope lubricants are formulated with specific penetration and tack characteristics — much heavier and more adhesive than bearing greases — and contain corrosion inhibitors for the rope strand interior.
A. Shell Gadus S3 Wirerope A is tested to ASTM D1264 (water washout).
A. Yes, Shell Gadus S3 Wirerope A is positioned as water-resistant — suiting marine and outdoor wire-rope applications.
A. Both are Shell Gadus heavy-duty greases that can lubricate wire ropes. S2 OG 40 is a dual-positioned open-gear and wire-rope grease for slow-speed gear and rope service. S3 Wirerope A (this product) is specifically positioned for wire-rope lubrication with formulation focused on rope-strand penetration and corrosion protection.
A. NLGI is the universal grease consistency standard every reputable grease meets, ranging from NLGI 000 (semi-fluid) to NLGI 3 (firm). It is your baseline check — match the grade your handbook specifies (e.g., NLGI 2 for most multi-purpose applications) and the grease is technically suitable for your machine. Every grease on our site lists its NLGI grade.
A. An OEM Specification is the grease requirement set by a vehicle or equipment manufacturer (e.g., MB 267.0, MAN 283 Li-P 2). When a grease lists the code, the grease manufacturer has developed and tested it to meet the criteria the equipment manufacturer requires. Match the code in your handbook and you have a grease engineered for your machine.
A. An OEM Approval means the grease has been formally tested and signed off by the equipment manufacturer and listed on their official approved-products register (e.g., MB-Approval 267.0). An Approval confirms the grease is recognised by the equipment manufacturer for service use in their machines.
By sharing your email, you agree to our privacy policy & terms of service