Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Wet environments are where standard hose clips quietly fail - corrosion locks the screw, pits the band and ends any chance of re-tensioning the joint.
Worm drive clips seal by drawing the band evenly through a captive screw housing, and the HGS50RP adds the JCS details that make that reliable - a 35-50mm adjustment span, a cold-headed, work-hardened hex screw with rolled threads that will not round off, and fully rounded band edges. Recommended tightening torque for this size is 6.0 Nm (54 lb-in). Manufactured to exceed BS5315, Kitemarked and NATO approved.
The bag of 10 is the trade format - boatyards, pump engineers and treatment-plant maintenance buying stainless by quantity. Specification is unchanged: 18/8 304 stainless in every component, salt mist tested, Lloyd's Register Type Approved for marine, offshore and industrial service, and used across pumping, stormwater, wastewater and irrigation systems.
Also available - the same clip as a trade bag (HGS50BG); the same clip as a bulk pack (HGS50BP); the 35-45mm size (HGS45RP); the 40-55mm size (HGS55RP).
All-stainless construction verified by salt mist testing - made and batch-tested in-house in Sudbury, Suffolk under ISO 9001:2015.
| Adjustment Range | 35-50mm (approx 1 3/8 - 1 15/16 in) |
|---|---|
| Material | 304 stainless steel 18/8 (EN 1.4301), all components stainless |
| Type | Worm drive |
| Recommended Torque | 6.0 Nm (54 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Approval | Lloyd's Register Type Approval (marine, offshore, industrial) |
| Applications | Marine, offshore & industrial (Lloyd's Register Type Approved); pumping, stormwater & wastewater systems; agricultural irrigation networks (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Hose Clip 25-35mm, 304 Stainless Steel Worm Drive - JCS Hi-Grip HGS35PM2 (10 Pack)
£18.16
£17.63
3% OFF
|
Hose Clip 22-30mm, 304 Stainless Steel Worm Drive - JCS Hi-Grip HGS30PM2 (10 Pack)
£17.65
£17.14
3% OFF
|
|||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | HGS50BG | HGS50BP | HGS35PM2 | HGS30PM2 | HGS80BG |
| Material | Stainless steel | Stainless steel | Stainless steel | Stainless steel | Stainless steel |
| Clamping Range | 35-50mm | 35-50mm | 25-35mm | 22-30mm | 60-80mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size | Single size |
| Grade | 304 | 304 | 304 | 304 | 304 |
| Pack Qty | 5 | 10 | 10 | 10 | 10 |
A. It adjusts between 35-50mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 35-50mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 1 3/8 to 1 15/16 in, covering common 1 1/2 and 1 3/4 in hose sizes.
A. JCS recommends 6.0 Nm (54 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. Yes - this is the specification JCS makes for exactly that duty: 18/8 marine-quality 304 stainless with Lloyd's Register Type Approval covering marine, offshore and industrial service, suited to salt water and other highly corrosive environments.
A. No mixed metals here - band, housing and screw are all the same stainless grade, and JCS verifies that through salt mist testing. Cheaper clips often pair a stainless band with a plated screw, which is the part that fails first.
A. Yes - JCS stainless hose clips are used across water and drainage infrastructure, including pumping solutions, stormwater and overflow management, wastewater treatment and agricultural irrigation networks.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 10 clips, all 35-50mm adjustment range. Other pack formats of the same clip are listed separately.
A. We accept all major credit and debit cards, along with PayPal.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
