Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGS45RP
Outdoors, in washdown bays or anywhere salt and moisture linger, an ordinary plated clip corrodes and seizes long before the hose it holds fails.
This is the 35-45mm size of the Hi-Grip worm drive range. Where cheaper clips cut their threads and leave sharp band edges, JCS rolls the screw threads for strength and fully rounds the band edges so the hose is protected as the clip bites. JCS publishes a recommended torque of 5.0 Nm (45 lb-in) for this size - seat the clip centrally on the barb and work up to it gradually. Hi-Grip exceeds BS5315 and holds BSI Kitemark and NATO approvals.
Marine-quality 304 stainless in every part, salt mist tested and Lloyd's Register Type Approved, this is the clip for joints that live wet - on deck, in bilges, on pumps and around treatment plant. Size from the fitted outside diameter of the hose, tighten in stages to the recommended torque, and recheck after high-vibration service. The 10-pack stocks the spares locker properly.
Also available - the same clip as a 5-pack (HGS45PM1); the 30-40mm size (HGS40RP); the 35-50mm size (HGS50RP); a zinc plated version in the same size and pack (HGZ45RP).
All-stainless construction verified by salt mist testing - made and batch-tested in-house in Sudbury, Suffolk under ISO 9001:2015.
| Adjustment Range | 35-45mm (approx 1 3/8 - 1 3/4 in) |
|---|---|
| Material | 304 stainless steel 18/8 (EN 1.4301), all components stainless |
| Type | Worm drive |
| Recommended Torque | 5.0 Nm (45 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Approval | Lloyd's Register Type Approval (marine, offshore, industrial) |
| Applications | Marine, offshore & industrial (Lloyd's Register Type Approved); pumping, stormwater & wastewater systems; agricultural irrigation networks (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | HGS45PM1 | HGS40RP | HGS50RP | HGZ45RP |
| Material | Stainless steel | Stainless steel | Stainless steel | Mild steel zinc plated |
| Clamping Range | 35-45mm | 30-40mm | 35-50mm | 35-45mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size |
| Grade | 304 | 304 | 304 | |
| Pack Qty | 5 | 10 | 10 | 10 |
A. It adjusts between 35-45mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 35-45mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 1 3/8 to 1 3/4 in, covering common 1 1/2 and 1 3/4 in hose sizes.
A. JCS recommends 5.0 Nm (45 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. No mixed metals here - band, housing and screw are all the same stainless grade, and JCS verifies that through salt mist testing. Cheaper clips often pair a stainless band with a plated screw, which is the part that fails first.
A. Yes - JCS stainless hose clips are used across water and drainage infrastructure, including pumping solutions, stormwater and overflow management, wastewater treatment and agricultural irrigation networks.
A. For most marine and wet industrial duty, this 304 (18/8) clip with its Lloyd's Register Type Approval is the standard answer. JCS reserves its 316 grade for the most demanding settings - offshore, food and pharmaceutical - so if that is your application, ask us about options.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 10 clips, all 35-45mm adjustment range. Other pack formats of the same clip are listed separately.
A. WhatsApp us on 07754 288583 with photos of the item and packaging.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
