Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGS30PM2
Variations
Around water - pumped, sprayed or salt-laden - clip corrosion is the failure mode; the cure is marine-quality stainless in every component.
This is the 22-30mm size of the Hi-Grip worm drive range. Where cheaper clips cut their threads and leave sharp band edges, JCS rolls the screw threads for strength and fully rounds the band edges so the hose is protected as the clip bites. JCS publishes a recommended torque of 5.0 Nm (45 lb-in) for this size - seat the clip centrally on the barb and work up to it gradually. Hi-Grip exceeds BS5315 and holds BSI Kitemark and NATO approvals.
Every component is the same grade of 304 stainless steel, verified by JCS's salt mist testing, so there is no plated screw or mixed-metal weak point to corrode first. Lloyd's Register Type Approval covers marine, offshore and industrial service. Choose the size whose adjustment range covers the fitted outside diameter of your hose; the 10-pack covers a full circuit or keeps spares aboard.
Also available - the same clip in a 5-pack (HGS30PM1); the 17-25mm size (HGS25PM2); the 25-35mm size (HGS35PM2); a zinc plated version of the same size and pack (HGZ30PM2).
An industry-standard marine clip, sized by honest adjustment ranges and backed by over 180 years of British manufacturing.
| Adjustment Range | 22-30mm (approx 7/8 - 1 3/16 in) |
|---|---|
| Material | 304 stainless steel 18/8 (EN 1.4301), all components stainless |
| Type | Worm drive |
| Recommended Torque | 5.0 Nm (45 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Approval | Lloyd's Register Type Approval (marine, offshore, industrial) |
| Applications | Marine, offshore & industrial (Lloyd's Register Type Approved); pumping, stormwater & wastewater systems; agricultural irrigation networks (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Hose Clip 17-25mm, 304 Stainless Steel Worm Drive - JCS Hi-Grip HGS25PM2 (10 Pack)
£17.17
£16.67
3% OFF
|
Hose Clip 25-35mm, 304 Stainless Steel Worm Drive - JCS Hi-Grip HGS35PM2 (10 Pack)
£18.16
£17.63
3% OFF
|
||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | HGS30PM1 | HGS25PM2 | HGS35PM2 | HGZ30PM2 |
| Material | Stainless steel | Stainless steel | Stainless steel | Mild steel zinc plated |
| Clamping Range | 22-30mm | 17-25mm | 25-35mm | 22-30mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size |
| Grade | 304 | 304 | 304 | |
| Pack Qty | 5 | 10 | 10 | 10 |
A. This size spans 22-30mm of fitted hose outside diameter. Measure the hose over its fitting, not the bare bore - anywhere inside 22-30mm and the HGS30PM2 is the right clip. One JCS size covers a span that would take two fixed nut-and-bolt clamps. In imperial terms that is roughly 7/8 to 1 3/16 in, covering common 7/8 and 1 in hose sizes.
A. JCS recommends 5.0 Nm (45 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. Yes - every component is the same grade of stainless steel, verified through JCS's salt mist testing, so there is no mixed-metal weak point to corrode first.
A. Yes - JCS stainless hose clips are used across water and drainage infrastructure, including pumping solutions, stormwater and overflow management, wastewater treatment and agricultural irrigation networks.
A. Hi-Grip 304 stainless is marine-quality 18/8 steel with Lloyd's Register Type Approval and is suited to saltwater service. JCS also makes a 316 grade for maximum corrosion resistance in the most demanding marine, offshore, food and pharmaceutical settings - contact us if your application is in that category.
A. The screw is cold-headed and work-hardened with a sharply defined hexagon and rolled threads to resist slipping and rounding. For high-vibration applications JCS recommends rechecking the clip after use to maintain seal integrity.
A. This is a pack of 10 clips, all 22-30mm adjustment range. Other pack formats of the same clip are listed separately.
A. Yes - WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
A. We accept all major credit and debit cards, along with PayPal.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
