Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGS70RP
Salt, spray and chemicals make short work of plated steel; a hose clip for that duty has to be stainless through and through.
This is the 50-70mm size of the Hi-Grip worm drive range. Where cheaper clips cut their threads and leave sharp band edges, JCS rolls the screw threads for strength and fully rounds the band edges so the hose is protected as the clip bites. JCS publishes a recommended torque of 6.0 Nm (54 lb-in) for this size - seat the clip centrally on the barb and work up to it gradually. Hi-Grip exceeds BS5315 and holds BSI Kitemark and NATO approvals.
Every component is the same grade of 304 stainless steel, verified by JCS's salt mist testing, so there is no plated screw or mixed-metal weak point to corrode first. Lloyd's Register Type Approval covers marine, offshore and industrial service. Choose the size whose adjustment range covers the fitted outside diameter of your hose; the 10-pack covers a full circuit or keeps spares aboard.
Also available - the same clip as a trade bag (HGS70BG); the same clip as a bulk pack (HGS70BP); the 45-60mm size (HGS60RP); a zinc plated version in the same size and pack (HGZ70RP).
Lloyd's Register Type Approval on a stocked, off-the-shelf trade pack is rare at any price point.
| Adjustment Range | 50-70mm (approx 1 15/16 - 2 3/4 in) |
|---|---|
| Material | 304 stainless steel 18/8 (EN 1.4301), all components stainless |
| Type | Worm drive |
| Recommended Torque | 6.0 Nm (54 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Approval | Lloyd's Register Type Approval (marine, offshore, industrial) |
| Applications | Marine, offshore & industrial (Lloyd's Register Type Approved); pumping, stormwater & wastewater systems; agricultural irrigation networks (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | HGS70BG | HGS70BP | HGS60RP | HGZ70RP |
| Material | Stainless steel | Stainless steel | Stainless steel | Mild steel zinc plated |
| Clamping Range | 50-70mm | 50-70mm | 45-60mm | 50-70mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size |
| Grade | 304 | 304 | 304 | |
| Pack Qty | 5 | 5 | 10 | 10 |
A. It adjusts between 50-70mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 50-70mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 1 15/16 to 2 3/4 in, covering common 2 and 2 1/2 in hose sizes.
A. JCS recommends 6.0 Nm (54 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. No mixed metals here - band, housing and screw are all the same stainless grade, and JCS verifies that through salt mist testing. Cheaper clips often pair a stainless band with a plated screw, which is the part that fails first.
A. Yes - JCS stainless hose clips are used across water and drainage infrastructure, including pumping solutions, stormwater and overflow management, wastewater treatment and agricultural irrigation networks.
A. Hi-Grip 304 stainless is marine-quality 18/8 steel with Lloyd's Register Type Approval and is suited to saltwater service. JCS also makes a 316 grade for maximum corrosion resistance in the most demanding marine, offshore, food and pharmaceutical settings - contact us if your application is in that category.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 10 clips, all 50-70mm adjustment range. Other pack formats of the same clip are listed separately.
A. Yes - WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
A. We accept all major credit and debit cards, along with PayPal.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
