Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £5.49 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: FB02-45
Variations
Where vibration isolation takes priority over restraint, the FB02-45 flanged bush delivers the compliance required to absorb low-frequency disturbance in lighter and sensitive installations. Bonded to a 45 Shore A rubber element between inner and outer metal sleeves, this Fig. 2 bush carries a maximum load of 65 kg while offering the generous deflection characteristic of a soft-grade compound, making it the right choice when protecting delicate machinery or operator environments from transmitted vibration matters most. The rubber-to-metal bonded construction is inherent to the inner-outer-sleeve family: no lubrication is required and the assembly is fully maintenance-free, supporting prolonged service life under dynamic loads. The soft 45 Shore A grade is specifically suited to applications where the priority is isolating rather than anchoring, pivot bearings, mechanical linkages, and cab mounts in lighter off-road or agricultural equipment represent typical use cases, alongside power generation and marine installations where noise and vibration transmission must be minimised without imposing high restraining forces. Key dimensions for installation planning are: outer diameter A 48 mm, flange diameter B 51 mm, overall length C 24 mm, inner bore D 18 mm, inner sleeve length E 12.5 mm, flange thickness F 38 mm, and bore G 8 mm. The bush may be loaded in shear, compression, or a combination of both. Stainless steel metalwork and oil-resistant or high-temperature rubber compounds are available on request for demanding environments.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £5.49
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | TB50 | IOS1284 | IOS50806575 | TBCBA20 | TB75 |
| Type | Bush | Bush | Bush | Bush | Bush |
| Size | 49mm | 44.45mm | 50mm | 50.8mm | 50.8mm |
| Deflection | 1.6 | 2.5 | 2.16 | ||
| Overall Height | 50.8mm | ||||
| Size Range | 26-50mm | 26-50mm | 26-50mm | 51-100mm | 51-100mm |
A. The FB02-45 is rated to a maximum load of 65 kg. As a 45 Shore A soft-grade bush, it is intended for lighter and sensitive installations where isolation from vibration takes priority over carrying high loads.
A. A 45 Shore A rating indicates a soft rubber compound. Softer grades allow greater deflection under load, which delivers better vibration isolation — particularly at lower frequencies. They are suited to lighter equipment and applications where protecting the structure or operator from transmitted vibration is the primary requirement, rather than restraining heavy dynamic forces.
A. The FB02-45 is a Fig. 2 flanged bush with the following dimensions: outer diameter (A) 48 mm, flange diameter (B) 51 mm, overall length (C) 24 mm, inner bore (D) 18 mm, inner sleeve length (E) 12.5 mm, flange thickness (F) 38 mm, and bore (G) 8 mm.
A. The FB02-45 is suited to pivot bearings, mechanical linkages, and cab mounts, as well as off-road vehicle, agricultural, power generation, and marine installations where low-frequency vibration isolation in lighter or sensitive equipment is the priority. It may be loaded in shear, compression, or a combination of both.
A. No. The rubber-to-metal bonded construction means the FB02-45 is completely maintenance-free and requires no lubrication throughout its service life.
A. Yes. Stainless steel metalwork and oil-resistant or high-temperature rubber compounds are available on request, as are additional and custom sizes.
A. Yes. The same Fig. 2 flanged profile is available in 60 Shore A (FB02-60) for medium-duty general-purpose use and 75 Shore A (FB02-75) for higher-load or high-restraint applications. The range also covers alternative flange and sleeve geometries: FB00, FB10, FB20, FB21, FB40, and FB41, each available in multiple Shore grades.
A. Standard UK mainland delivery is 3–5 working days. Next-day delivery is available on most products and will appear as an option at checkout where eligible.
A. We accept returns within 30 days of purchase for items that are unused, undamaged, and in their original packaging. Returns are available only for UK-delivered orders and must include proof of purchase. Before returning an item, please contact us at [email protected] to obtain a Return Merchandise Number (RMN).
A. We accept returns within 30 days of purchase for items that are unused, undamaged, and in their original packaging. Returns are available only for UK-delivered orders and must include proof of purchase. Before returning an item, please contact us at [email protected] to obtain a Return Merchandise Number (RMN).
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
