POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 5040FFB10-60
Variations
The 5040FFB10-60 is a 50 x 40 mm Female Flat Buffer with an M10 thread, rated to a maximum load of 257.0 kg and a controlled deflection of 10.00 mm. At 60 Shore A, this mid-range hardness grade delivers the balanced performance that defines general-purpose machinery mounting, absorbing and dissipating impact energy while maintaining meaningful structural support across the broad middle ground of industrial application. Rubber-to-metal bonded construction gives this buffer its characteristic combination of resilience and dimensional stability. The female threaded interface simplifies direct installation onto equipment frames or substructures without additional hardware, while the flat geometry ensures consistent contact across a secondary surface. At this hardness grade, the buffer manages moderate compressive and shear loads with controlled movement, making it well suited to continuous-duty machinery environments where isolation and support must be balanced rather than traded off. With a 50 mm diameter and 40 mm height, this buffer is sized for mainstream general-machinery mounting duties, power generation equipment, agricultural machinery, commercial vehicles and construction plant all represent typical working environments. The 257.0 kg load ceiling and 10.00 mm deflection figure together reflect a mount designed to absorb meaningful dynamic shock without excessive travel, protecting surrounding structures and improving operator comfort over sustained operation. Custom variants in oil-resistant or high-temperature rubbers, and in stainless steel metalwork, are available on request. Alternative Shore grades for this 50 x 40 mm M10 geometry are available as the 5040FFB10-45 (softer, greater isolation) and 5040FFB10-70 (firmer, higher load restraint).
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 60 |
|---|---|
| Body diameter D (mm) | 50 |
| Overall height H (mm) | 40 |
| Fixing thread / bolt size d | M10 |
| Max load (kg) | 257 |
| Deflection (mm) | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 4028FFB10-70 | 4027FFB08-70 | 4028MFB23-70 | 5030FFB12-45 | 5040MFB25-60 |
| Type | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer |
| Length | 28mm | 27mm | 28mm | 30mm | 40mm |
| Size | 40x28mm | 40x27mm | 40x28mm | 50x30mm | 50x40mm |
| Deflection | 7 | 6.75 | 6.8 | 7.5 | 10 |
| Diameter | 40mm | 40mm | 40mm | 50mm | 50mm |
| Diameter Range | 26-50mm | 26-50mm | 26-50mm | 26-50mm | 26-50mm |
| Length Range | 26-50mm | 26-50mm | 26-50mm | 26-50mm | 26-50mm |
| Shore Hardness | 70 | 70 | 70 | 45 | 60 |
| Thread | M10 | M8 | M8 | M12 | M10 |
| Show More | |||||
A. This buffer is rated to a maximum load of 257.0 kg with a deflection of 10.00 mm, making it suitable for moderate-to-substantial machinery mounting duties at a balanced mid-range hardness.
A. At 60 Shore A, this buffer sits in the mid-range of the hardness scale, providing a balance between vibration isolation and load-bearing support. Softer grades offer greater deflection at lighter loads; harder grades carry higher loads with less movement. The 60 Shore A grade is well matched to general-purpose industrial machinery where both properties are needed.
A. The 5040FFB10-60 has a 50 mm diameter, 40 mm height, and a female M10 threaded insert for direct mounting to equipment frames or structures.
A. This buffer is appropriate for construction equipment, industrial machinery, agricultural equipment, commercial vehicles, and power generation plant. It is also used in marine, railway, automotive and defence applications where controlled shock and vibration absorption are required.
A. The rubber-to-metal bonded construction absorbs and dissipates energy from impact shocks and vibration generated by external moving components or operating machinery. This reduces transmitted force to surrounding structures, improves machinery lifespan, and enhances operator comfort.
A. Yes. The same geometry is available as the 5040FFB10-45 for greater deflection and softer isolation at lower loads, and the 5040FFB10-70 for firmer support at higher loads with reduced movement. A wider range of face diameters and M16 threaded variants is also available.
A. Yes — stainless steel metalwork and oil-resistant or high-temperature rubber compounds are available on request, along with additional and custom sizes. Contact us to discuss your requirements.
A. WhatsApp us on 07754 288583 with photos of the item and packaging, and we will resolve the issue in line with our returns policy.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
