Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 5040MFB25-60
Variations
Carrying a maximum load of 252.0 kg with a controlled deflection of 10.0 mm, the 50 x 40 mm Male Flat Buffer in 60 Shore A hardness sits at the mid-point of this range and is engineered for the broad middle ground of machinery mounting, where neither extreme isolation nor maximum load capacity is required, but a reliable balance of both is essential. The thread specification is M10 x 25 mm, and rubber-to-metal bonded construction ensures consistent performance under sustained service conditions. At 60 Shore A, this buffer delivers the moderate stiffness that makes it well suited to mainstream general-machinery applications running at moderate loads. It absorbs and dissipates energy from impact shocks produced by external moving components, functioning either as a secondary shock-absorbing element or as a direct-contact elastic buffer against a surface. The combination of manageable deflection and meaningful load capacity means it can be pressed into service across a wide cross-section of plant and equipment without the need for detailed load analysis at every installation point. Practical applications span industrial machinery, agricultural equipment, construction equipment, commercial vehicles and elevators. The buffer may be loaded in shear, compression or a combination of both, and its low-profile flat-face geometry keeps installation straightforward. Benefits to the wider installation include improved machinery lifespan, protection of surrounding structures and improved operator comfort. Custom options, including stainless steel metalwork and oil-resistant or high-temperature rubber compounds, as well as additional and bespoke sizes. Are available on request.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 60 |
|---|---|
| Body diameter D (mm) | 50 |
| Overall height H (mm) | 40 |
| Stud thread d | M10 |
| Stud length L (mm) | 25 |
| Max load (kg) | 252 |
| Deflection (mm) | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Male Flat Buffer - Anti-Vibration, Thread Size M10, Max Load 252Kg - 5040MFB33-60
£13.76
£13.49
2% OFF
|
||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 4028MFB23-70 | 5030FFB12-45 | 5040MFB33-60 | 4027FFB08-70 | 4030FFB10-70 |
| Type | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer |
| Length | 28mm | 30mm | 27mm | 30mm | |
| Height | 40mm | ||||
| Size | 40x28mm | 50x30mm | 40x27mm | 40x30mm | |
| Deflection | 6.8 | 7.5 | 10 | 6.75 | 7.5 |
| Diameter | 40mm | 50mm | 40mm | 40mm | |
| Diameter Range | 26-50mm | 26-50mm | 26-50mm | 26-50mm | |
| Length Range | 26-50mm | 26-50mm | 26-50mm | 26-50mm | |
| Shore Hardness | 70 | 45 | 70 | 70 | |
| Thread | M8 | M12 | M10 | M8 | M10 |
| Show More | |||||
A. This buffer has a maximum load rating of 252.0 kg and a deflection of 10.0 mm, making it suitable for moderate-load general machinery mounting applications.
A. At 60 Shore A, this buffer sits at the mid-range of hardness, offering a balance between vibration isolation and load support. Softer grades provide greater deflection and better isolation at lower loads; harder grades carry higher loads with less movement. The 60 Shore A grade is appropriate for mainstream general-machinery mounting at moderate loads.
A. The buffer body measures 50 mm diameter by 40 mm height (D x H: 50 x 40 mm). The male threaded stud is M10 with a 25 mm stud length (d x L: M10 x 25 mm).
A. This buffer is suitable for industrial machinery, agricultural equipment, construction equipment, commercial vehicles and elevators. Industries served include construction and off-highway, agriculture, power generation, marine, railway and mass transit, automotive, and military and defence.
A. Male Flat Buffers use rubber-to-metal bonded construction to absorb and dissipate energy from impact shocks generated by external moving components. They can act as a secondary shock-absorbing element or as a direct-contact elastic buffer against a surface, and may be loaded in shear, compression, or a combination of both.
A. Yes — the 50 x 40 mm / M10 x 25 mm format is also available in 45 Shore A (SKU: 5040MFB25-45) for greater deflection and lower-load isolation, and 70 Shore A (SKU: 5040MFB25-70) for higher load capacity with reduced deflection.
A. Yes — stainless steel metalwork, oil-resistant rubber compounds, high-temperature rubber compounds, and additional or bespoke sizes are all available on request.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
