Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £5.49 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 5050FFB10-60
Variations
Sitting at the mid-point of the Female Flat Buffer range, the 5050FFB10-60 is a 50 x 50 mm rubber-to-metal bonded buffer with an M10 female thread, rated to a maximum load of 208.0 kg with a controlled deflection of 12.50 mm. At 60 Shore A, this grade delivers the balanced combination of elastic support and vibration isolation that makes it the practical first choice for mainstream general-machinery mounting at moderate operating loads. The rubber-to-metal bonded construction absorbs and dissipates impact energy rather than transmitting it, cushioning machinery against shock from external moving components. The 60 Shore A hardness occupies the broad middle ground of the range: softer than the 70 Shore A variant to retain meaningful deflection and isolation capacity, yet firm enough to carry substantial loads without excessive movement. The female thread interface simplifies installation and allows secure, repeatable fastening directly to machine frames or baseplate surfaces. With a maximum load of 208.0 kg and 12.50 mm deflection, the 5050FFB10-60 is well suited to general industrial machinery, agricultural equipment, construction plant, commercial vehicles, and power generation equipment where moderate shock loads and continuous vibration are present. It is equally applicable in elevator and marine installations requiring reliable energy dissipation without the compliance of a softer grade. Mounts of this type may be loaded in compression, shear, or a combination of both, broadening the range of mounting configurations it can serve. This buffer is part of a wider size and hardness range.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 60 |
|---|---|
| Body diameter D (mm) | 50 |
| Overall height H (mm) | 50 |
| Fixing thread / bolt size d | M10 |
| Max load (kg) | 208 |
| Deflection (mm) | 12.5 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £5.49
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Male Flat Buffer - Anti-Vibration, Thread Size M10, Max Load 203.5Kg - 5050MFB25-60
£11.27
£11.05
2% OFF
|
||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 4040FFB08-70 | 4025FFB08-60 | 4025MFB25-60 | 5050MFB25-60 | 4025MFB23-60 |
| Type | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer |
| Length | 40mm | 25mm | 25mm | ||
| Height | 50mm | 25mm | |||
| Size | 40x40mm | 40x25mm | 40x25mm | 50x50mm | |
| Deflection | 10 | 6.25 | 6.3 | 12.5 | 6.3 |
| Diameter | 40mm | 40mm | 40mm | ||
| Diameter Range | 26-50mm | 26-50mm | 26-50mm | ||
| Length Range | 26-50mm | 11-25mm | 11-25mm | ||
| Shore Hardness | 70 | 60 | 60 | ||
| Thread | M8 | M8 | M10 | M10 | M8 |
| Show More | |||||
A. The 5050FFB10-60 has a maximum load rating of 208.0 kg and a deflection of 12.50 mm.
A. At 60 Shore A, this buffer sits in the medium hardness band, providing a balance between isolation and structural support. Softer grades offer greater deflection and better isolation at lower loads, while harder grades carry higher loads with less movement. The 60 Shore A grade is suited to general-purpose machinery mounting at moderate loads where both energy dissipation and positional control are required.
A. The 5050FFB10-60 measures 50 mm diameter by 50 mm height and features an M10 female thread.
A. This buffer is suited to general industrial machinery, agricultural equipment, construction and off-highway plant, commercial vehicles, power generation equipment, marine installations, and elevator systems where moderate shock and vibration loads need to be absorbed and dissipated.
A. The buffer uses rubber-to-metal bonded construction to absorb and dissipate impact energy from external moving components. It can be loaded in compression, shear, or a combination of both, and works by cushioning machinery against shock loads while reducing transmitted vibration to surrounding structures.
A. Yes. This footprint is also available in 45 Shore A (5050FFB10-45) for greater isolation at lighter loads, and 70 Shore A (5050FFB10-70) for higher-load or higher-shock duty. Larger footprint variants include 100100FFB16, 10030FFB16, 10040FFB16, 10050FFB16, 10055FFB16, and 10060FFB16. Stainless steel hardware and oil-resistant or high-temperature rubbers are available on request.
A. WhatsApp us on 07754 288583 with photos of the item and packaging, and we will resolve the issue in line with our returns policy.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
