Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 7050MM37-70
Variations
With a rated maximum load of 292.0 kg with a controlled deflection of just 4.4 mm, the 70 Shore A male-male bobbin mount 7050MM37-70 is the upper-range option in the 70 x 50 mm M12 thread family, built for applications where high load capacity and minimal movement take priority over maximum isolation. The rubber-to-metal bonded construction uses a 70 Shore A compound that resists compression under heavy static and dynamic loads, making this mount the right choice where softer grades would allow excessive travel or fail to hold machinery firmly under shock and impact conditions. At 70 mm diameter by 50 mm height, with M12 x 37 mm male stud threads at both ends, this bobbin can be loaded in shear, compression, or a combination of both. The firmer rubber characteristic suits installations on diesel engines and generator sets subject to intermittent shock, heavy industrial machinery and equipment where structural restraint is critical, and exhaust or power-unit mountings on construction and off-highway plant, agricultural equipment, and marine or military applications. It is equally applicable where instruments or sensitive equipment must be positionally constrained against hard knocks rather than gently isolated. The male-male thread configuration provides a direct, through-mount fixing between two structural faces without the need for additional hardware beyond appropriate fasteners. Custom variants in stainless steel metalwork and oil-resistant or high-temperature rubbers, along with additional sizes, are available on request.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 70 |
|---|---|
| Body diameter D (mm) | 70 |
| Overall height H (mm) | 50 |
| Stud thread d | M12 |
| Stud length L (mm) | 37 |
| Max load (kg) | 292 |
| Deflection (mm) | 4.4 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 10050MM44-45 | 100100MM44-60 | 7070FF10-70 | 7540FF12-60 | 7535FF12-60 |
| Type | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount |
| Length | 50mm | 100mm | 70mm | ||
| Height | 40mm | 35mm | |||
| Size | 100x50mm | 100x100mm | 70x70mm | 75x40mm | |
| Deflection | 4.2 | 9.2 | 6.4 | 3.4 | 3.4 |
| Diameter | 100mm | 100mm | 70mm | ||
| Diameter Range | 51-100mm | 51-100mm | 51-100mm | ||
| Length Range | 26-50mm | 51-100mm | 51-100mm | ||
| Shore Hardness | 45 | 60 | 70 | ||
| Thread | M16 | M16 | M10 | M12 | M12 |
| Show More | |||||
A. This mount carries a maximum load of 292.0 kg with a deflection of 4.4 mm, making it the firmest and highest-load option in the 70 x 50 mm M12 bobbin range.
A. The 7050MM37-70 uses M12 male stud threads with a stud length of 37 mm at both ends, in a male-male configuration.
A. The mount measures 70 mm in diameter by 50 mm in height (D x H: 70 x 50 mm).
A. The 70 Shore A grade is designed for heavy loads, shock and impact duty, and applications requiring firm positional restraint. Typical uses include diesel engines, generator sets, heavy industrial machinery, construction and off-highway plant, agricultural equipment, and marine or military installations where minimal deflection under load is essential.
A. According to the family specification, harder grades carry higher loads with less movement, while softer grades give greater deflection and better isolation at lower loads. The 70 Shore A grade is therefore suited to high-load or shock applications, whereas the 45 Shore A (7050MM37-45) and 60 Shore A (7050MM37-60) variants in the same M12 70 x 50 mm geometry are better suited to lighter or general-purpose vibration isolation duties.
A. Yes — this bobbin mount may be loaded in shear, compression, or a combination of both, as confirmed in the product specification.
A. Yes — stainless steel metalwork, oil-resistant rubbers, high-temperature rubbers, and additional or custom sizes are available on request.
A. WhatsApp us on 07754 288583 with photos of the item and packaging, and we will resolve the issue in line with our returns policy.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
