Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 7050MM25-70
Variations
With a rated maximum load of 292.0 kg with a controlled deflection of just 4.4 mm, the 7050MM25-70 is a 70x50 mm male-male bobbin mount with M10x25 threaded studs, specified at 70 Shore A, the firmest grade in this bobbin family. And built for applications where mass must be held securely under sustained or impact loading. At 70 Shore A, the rubber compound is engineered to minimise movement rather than maximise compliance. Where softer grades trade load capacity for greater isolation travel, this firm-grade mount prioritises structural restraint: it resists displacement under shock and delivers precise, repeatable positioning on heavy plant. The rubber-to-metal bonded construction maintains this integrity across shear, compression, and combined loading axes without delamination under cyclic stress. The 70x50 mm body and M10x25 stud configuration suit installations on diesel engines, generator sets, and heavy industrial machinery where high static and dynamic loads demand a mount that will not allow progressive creep or excessive movement. The mount is equally applicable to construction and off-highway equipment, agricultural machinery, and power generation plant, wherever vibration management must coexist with firm mechanical restraint. The family weight range extends from approximately 1 kg up to 2,000 kg per mounting point, with this SKU positioned at the upper-load end of the 70x50 mm series. This mount is available in 70 Shore A (7050MM25-70) as documented here. Related 70x50 mm male-male variants in softer grades include the 45 Shore A (7050MM25-45) and 60 Shore A (7050MM25-60).
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 70 |
|---|---|
| Body diameter D (mm) | 70 |
| Overall height H (mm) | 50 |
| Stud thread d | M10 |
| Stud length L (mm) | 25 |
| Max load (kg) | 292 |
| Deflection (mm) | 4.4 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 10050MM44-45 | 100100MM44-60 | 7070FF10-70 | 7540FF12-60 | 7535FF12-60 |
| Type | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount | Bobbin Mount |
| Length | 50mm | 100mm | 70mm | ||
| Height | 40mm | 35mm | |||
| Size | 100x50mm | 100x100mm | 70x70mm | 75x40mm | |
| Deflection | 4.2 | 9.2 | 6.4 | 3.4 | 3.4 |
| Diameter | 100mm | 100mm | 70mm | ||
| Diameter Range | 51-100mm | 51-100mm | 51-100mm | ||
| Length Range | 26-50mm | 51-100mm | 51-100mm | ||
| Shore Hardness | 45 | 60 | 70 | ||
| Thread | M16 | M16 | M10 | M12 | M12 |
| Show More | |||||
A. This mount is rated to a maximum load of 292.0 kg and has a deflection of 4.4 mm at that load.
A. The 70x50 mm figure refers to the outer diameter and height of the rubber bobbin body. M10x25 denotes the male threaded stud size (M10 thread, 25 mm stud length) present at both ends of this male-male configuration.
A. Rubber hardness directly governs the trade-off between load capacity and isolation movement. At 70 Shore A, this firm grade carries the highest load with the least deflection in the series — making it the correct choice where equipment must be held firmly, where shock or impact loads are present, or where progressive creep under sustained weight would be unacceptable. Softer grades offer greater deflection and better low-frequency isolation but at lower load ratings.
A. The mount may be loaded in shear, compression, or a combination of both, as the rubber-to-metal bonded construction accommodates multi-axis loading.
A. Source-confirmed applications include diesel engines, generator sets, and heavy industrial machinery and equipment. Industries served include construction and off-highway, agriculture, power generation, marine, railway and mass transit, automotive, and military and defence.
A. Yes — stainless steel metalwork and oil-resistant or high-temperature rubber compounds are available on request for specialist operating environments.
A. Yes. The 70x50 mm male-male bobbin is also available in 45 Shore A (7050MM25-45) and 60 Shore A (7050MM25-60). The wider range includes additional configurations: 0808MM06, 100100MM44, 10030MM44, 10040MM44, 10050MM44, and 10055MM44.
A. We accept all major credit and debit cards, along with PayPal.
A. Standard UK mainland delivery is 3–5 working days. Next-day delivery is available on most products and will appear as an option at checkout where eligible.
A. Standard UK mainland delivery is 3–5 working days. Next-day delivery is available on most products and will appear as an option at checkout where eligible.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
