Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

Brands

FAQs

From the fastener specification on the tool's listing: staplers state the staple series, crown width, gauge and leg-length range; nailers state nail type, gauge and length range. The gun and its consumables are a matched system — off-spec fasteners jam and damage drivers. Matching consumables are listed alongside each tool.

Volume and larger rivets without the fatigue: hydraulic-pneumatic action sets each blind rivet in one trigger pull, consistently, all day — the difference on bodywork and fabrication runs where hand riveting means aching forearms and inconsistent sets. Capacity by rivet diameter and material is listed per tool.

Air supply first: pressure below the tool's operating range drives shallow, and long thin hoses starve the gun on rapid fire — check the consumption and pressure figures against the compressor and line. Then consumables: off-spec or damp fasteners, and a dry tool — a few drops of air-tool oil daily keeps the driver and seals honest.

The operating range stated on each tool's page — typically regulated at the tool, not run at raw receiver pressure. Over-pressure drives too deep and hammers seals; under-pressure misfires. A small regulator at the tool or bay, plus clean lubricated air, is the supply discipline that keeps fastening tools consistent.

Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Air Staplers Nailers & Riveters

FilterFilters
View as Grid List

Air staplers, nailers and riveters put fastening on the air line: the pneumatic guns that drive staples, nails and rivets faster and more consistently than any hand method, for upholstery, joinery, bodywork and fabrication trades. PartsForMachines supplies the range to the trade as an Authorised Distributor and Seller for Sealey and Draper, with SIP equipment alongside.

The families split by fastener. Air staplers cover upholstery, trim and sheathing work, specified by the staple series they magazine, crown width, gauge and leg-length range being the compatibility that matters. Nailers run from brad and finish guns for joinery and trim through to framing-class tools, specified the same way: the nail type and length range the magazine accepts. Air riveters set blind pop rivets in the diameters bodywork and fabrication use, with hydraulic-pneumatic action doing in a trigger pull what hand riveters do in aching squeezes, specified by rivet diameter capacity and material. The working numbers sit on every product page: fastener compatibility, air consumption and operating pressure, magazine capacity and weight, with Compare lining up tools and Ask Simon confirming fastener compatibility, the question that matters most, since the gun and its consumables are a matched system.

Fasteners are listed alongside the tools in trade quantities, and supply discipline keeps the tools alive: regulated pressure to the tool's rating, clean lubricated air, and the consumables the magazine was designed for.

Couplings, hoses and the wider air tool range sit in the same section. For trade fit-outs, contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 10 of 10 entries
FAQs

From the fastener specification on the tool's listing: staplers state the staple series, crown width, gauge and leg-length range; nailers state nail type, gauge and length range. The gun and its consumables are a matched system — off-spec fasteners jam and damage drivers. Matching consumables are listed alongside each tool.

Volume and larger rivets without the fatigue: hydraulic-pneumatic action sets each blind rivet in one trigger pull, consistently, all day — the difference on bodywork and fabrication runs where hand riveting means aching forearms and inconsistent sets. Capacity by rivet diameter and material is listed per tool.

Air supply first: pressure below the tool's operating range drives shallow, and long thin hoses starve the gun on rapid fire — check the consumption and pressure figures against the compressor and line. Then consumables: off-spec or damp fasteners, and a dry tool — a few drops of air-tool oil daily keeps the driver and seals honest.

The operating range stated on each tool's page — typically regulated at the tool, not run at raw receiver pressure. Over-pressure drives too deep and hammers seals; under-pressure misfires. A small regulator at the tool or bay, plus clean lubricated air, is the supply discipline that keeps fastening tools consistent.

Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service