Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

By the job first. Blowguns are chosen on nozzle form, spray guns on feed type and needle size, and grease guns on what is being dispensed. Then check the inlet thread matches the air line, since Rp 1/4 is the common fitting across this leaf.

A conical nozzle concentrates the blast for clearing swarf, a safety nozzle bleeds sideways so it cannot seal against skin, an extension reaches into a cavity and turbo and aircurtain forms move more air. Low noise nozzles reduce the sound at the same delivery.

Gravity feed hangs the pot above the gun so it drains completely and suits smaller volumes. Suction feed draws from a pot below the gun and holds more paint. Pressure pot systems feed from a separate vessel for long runs without stopping.

With a long or right-angled gun. The Draper blow guns run at 300mm and 500mm, and the right-angled forms turn the blast where a straight gun cannot be aimed. Both are on this leaf alongside the standard bodies.

Pot sizes here run from 100ml to 600ml. A small pot suits touch-in and detail work where the gun is held at an angle, a larger pot suits a panel done in one pass without refilling.

Most carry an Rp 1/4 inlet, which is stated on the listing. The coupling on the end of your air line has to match that thread or an adaptor is needed, and the inlet is given per gun so it can be checked first.

Clear

Air Blow, Spray & Grease Guns

FilterFilters
View as Grid List

Three jobs share this leaf and each is picked differently. A blowgun is chosen on nozzle form, a spray gun on feed type and needle size, and a grease or underbody gun on what it is dispensing. What they have in common is the inlet thread, which has to match the air line already in the bay, and the fact that none of them work properly on a supply that cannot hold pressure.

Blowguns split by nozzle. A conical nozzle concentrates the blast, a safety nozzle bleeds pressure sideways so it cannot be held against skin, an extension reaches into a cavity and a turbo or aircurtain nozzle moves more air for the same supply. Low noise forms exist because a blowgun is the loudest thing on many benches. The PCL BG ladder runs these forms on a common Rp 1/4 inlet.

Spray guns split by how paint reaches the needle. Gravity feed hangs the pot above the gun and empties completely, suction feed draws from a pot below and suits larger volumes, and pressure pot systems feed from a separate vessel for long runs. Pot sizes here run 100 to 600ml and needle sizes are stated per gun, with pattern guns held alongside for coarser work.

Grease, underbody and caulking guns close the leaf out, along with long and right-angled Draper blow guns for work behind a panel. Nozzle form, inlet thread and pot size are all on the listing, and a photo of the existing coupling over WhatsApp on 07754288583 settles whether a gun will connect. Pot sizes, needle sizes and nozzle forms are given per gun rather than per range, so two guns from the same ladder can be compared directly.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 61 to 90 of 93 entries
FAQs

By the job first. Blowguns are chosen on nozzle form, spray guns on feed type and needle size, and grease guns on what is being dispensed. Then check the inlet thread matches the air line, since Rp 1/4 is the common fitting across this leaf.

A conical nozzle concentrates the blast for clearing swarf, a safety nozzle bleeds sideways so it cannot seal against skin, an extension reaches into a cavity and turbo and aircurtain forms move more air. Low noise nozzles reduce the sound at the same delivery.

Gravity feed hangs the pot above the gun so it drains completely and suits smaller volumes. Suction feed draws from a pot below the gun and holds more paint. Pressure pot systems feed from a separate vessel for long runs without stopping.

With a long or right-angled gun. The Draper blow guns run at 300mm and 500mm, and the right-angled forms turn the blast where a straight gun cannot be aimed. Both are on this leaf alongside the standard bodies.

Pot sizes here run from 100ml to 600ml. A small pot suits touch-in and detail work where the gun is held at an angle, a larger pot suits a panel done in one pass without refilling.

Most carry an Rp 1/4 inlet, which is stated on the listing. The coupling on the end of your air line has to match that thread or an adaptor is needed, and the inlet is given per gun so it can be checked first.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service