Cart
POPULAR CATEGORY
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £199.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £199.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | FREE | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £24.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £4.95 | 7 to 10 working days |
Product Number: 14FC70
Variations
Castrol Hyspin HVI 68 in the 208-litre drum is supplied for workshop bulk service and on-site refilling of mobile hydraulic equipment requiring a heavier viscosity. It is a high-viscosity-index (VI) hydraulic oil based on a carefully selected ashless (zinc-free) additive system designed to meet and exceed exacting performance standards.
The oil exhibits corrosion protection, thermal and oxidative stability, and hydrolytic stability — separating rapidly from water contamination. The ISO VG 68 viscosity grade is positioned for warm-ambient and higher-pressure hydraulic operations where a heavier viscosity than ISO VG 46 is specified.
Approvals and performance levels include ISO 6743-4; and DIN 51502 and 51524.
For single-machine service and smaller operators, Castrol Hyspin HVI 68 is also available in a 20-litre pack (PRD00001471).
This drum format is suited to workshop bulk supply, fleet service and high-throughput dispensing via a workshop pump or filtration cart. Store the drum on its side in a bunded area, with the bung uppermost to limit moisture and contamination ingress around the fitting.
The Castrol Hyspin™ HVI range of high viscosity index (VI) oils is based on a carefully selected ashless (zinc free) additive system designed to meet and exceed the most exacting performance standards. . Application Hyspin HVI oils are intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. In addition, Hyspin HVI exhibits excellent corrosion protection as well as outstanding thermal and oxidative stability. Hyspin HVI has excellent hydrolytic stability and separates rapidly from water contamination. Hyspin HVI contains a shear stable additive system which helps to maintain the viscosity characteristics of the product over a wide temperature range, even during prolonged use, and imparts a very low pour point which enables the product to be used in cold environments. The Hyspin HVI range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers. Applications include: Outdoor equipment which are likely to operate over wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running. Examples include off-highway and marine applications. Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with temperature. Examples include precision machine tools
Specifications, Approvals & Recommendations:Hyspin HVI grades meet the requirements of:
PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| ISO Viscosity Grade | 68 |
|---|---|
| Density @ 15°C / 59°F ISO 12185 /ASTM D4052 | 880 kg/m³ |
| Kinematic Viscosity @ 40°C / 104°F ISO 3104 /ASTM D445 | 68 mm²/s |
| Kinematic Viscosity @ 100°C / 212°F ISO 3104 /ASTM D445 | 8.1 mm²/s |
| Viscosity Index ISO 2909 /ASTM 2270 | >140 |
| Pour Point ISO 3016 /ASTM D97 | -36/-33°C/°F |
| Flash Point - closed cup method ISO 2719 /ASTM D93 | 220/428 °C/°F |
| Foam Sequence I -tendency / stability ISO 6247/ASTM D892 | 20/0 ml/ml |
| Water Separation @ 54°C/ 129°F (40/37/3)ISO 6614/ASTM D1401 | 15 min |
| Air Release @ 50°C /122°FISO 9120/ASTM D3427 | 8 min |
| FZG Gear Scuffing test -A/8.3/90 ISO 14635-1 | 12 Failure LoadStage |
| Rust test - distilled water(24 hrs) ISO 7210 /ASTM D665A | Rating Pass |
| Rust test - synthetic seawater (24 hrs) ISO 7210 /ASTM D665B | Rating Pass |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: UK Mainland Free
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Shell 550045522 Tellus S2 VX 68, Hydraulic Oil - 20 Litre
£156.27
£153.21
2% OFF
Free delivery in UK Mainland
|
Shell 550045418 Tellus S2 MX 68, Hydraulic Oil - 20 Litre
£124.39
£121.95
2% OFF
Free delivery in UK Mainland
|
Shell 550045527 Tellus S2 VX 68, Hydraulic Oil - 209 Litre
£1,587.80
£1,556.67
2% OFF
Free delivery in UK Mainland
|
Shell 550045417 Tellus S2 MX 68, Hydraulic Oil - 209 Litre
£1,503.28
£1,473.80
2% OFF
Free delivery in UK Mainland
|
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | PRD00004300 | PRD00004295 | PRD00004304 | PRD00004294 |
| Density, 15°C | 0.86 | 0.86 | 0.86 | 0.86 |
| Flash Point (COC) | 230 | 446 | 230 | 446 |
| Kinematic Viscosity @40°C | 68 | 68 | 68 | 68 |
| Pour Point | -30 | -24 | -30 | -24 |
| Colour | L0.5 | L0.5 | L0.5 | L0.5 |
| SAE | 68 | 68 | 68 | 68 |
| Volume | 20 | 20 | 209 | 209 |
| Viscosity Index | 143 | 105 | 143 | 105 |
| Show More | ||||
A. Castrol Hyspin HVI 68 is intended for severely stressed hydraulic systems requiring a high level of anti-wear performance and fine filtration. The ISO VG 68 viscosity is suited to warm-ambient and higher-pressure hydraulic operations.
A. Castrol Hyspin HVI 68 is supplied at ISO VG 68 — the heavier general-service hydraulic viscosity in the Hyspin HVI range.
A. Yes, Castrol Hyspin HVI 68 is based on a carefully selected ashless (zinc-free) additive system.
A. Castrol Hyspin HVI 68 meets ISO 6743-4; and DIN 51502 and 51524.
A. Both are Castrol Hyspin HVI high-viscosity-index ashless anti-wear hydraulic oils. HVI 46 is ISO VG 46 — the standard general-service viscosity. HVI 68 (this product) is ISO VG 68 — the heavier viscosity for warm-ambient or higher-pressure hydraulics.
A. API and ACEA are the universal lubricant performance standards every reputable oil meets. They are your baseline check — match the code your handbook specifies (e.g., API CI-4 or ACEA E7 for heavy-duty diesel) and the oil is technically suitable for your machine. Every oil on our site lists its API and ACEA classifications.
A. An OEM Specification is the lubricant requirement set by a vehicle or equipment manufacturer (e.g., MB 228.3, VW 504.00). When an oil lists the code, the oil manufacturer has developed and tested it to meet the criteria the equipment manufacturer requires. Match the code in your handbook and you have a lubricant engineered for your machine.
A. An OEM Approval means the oil has been formally tested and signed off by the equipment manufacturer and listed on their official approved-products register (e.g., MB-Approval 228.3). An Approval confirms the oil is recognised by the equipment manufacturer for service use in their machines.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
