Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
On pumps, washdown plant and boats, the clip is the first metal part to rust - unless every component of it is stainless.
This is the 90-120mm size of the Hi-Grip worm drive range. Where cheaper clips cut their threads and leave sharp band edges, JCS rolls the screw threads for strength and fully rounds the band edges so the hose is protected as the clip bites. JCS publishes a recommended torque of 6.0 Nm (54 lb-in) for this size - seat the clip centrally on the barb and work up to it gradually. Hi-Grip exceeds BS5315 and holds BSI Kitemark and NATO approvals.
Marine-quality 304 stainless in every part, salt mist tested and Lloyd's Register Type Approved, this is the clip for joints that live wet - on deck, in bilges, on pumps and around treatment plant. Size from the fitted outside diameter of the hose, tighten in stages to the recommended torque, and recheck after high-vibration service. The 10-pack keeps the maintenance store properly stocked.
Also available - the same clip as a bulk pack (HGS120BP); the 80-100mm size (HGS100BG); the 110-140mm size (HGS140BG); a zinc plated version in the same size and pack (HGZ120BG).
Lloyd's Register Type Approval on a stocked, off-the-shelf trade pack is rare at any price point.
| Adjustment Range | 90-120mm (approx 3 9/16 - 4 3/4 in) |
|---|---|
| Material | 304 stainless steel 18/8 (EN 1.4301), all components stainless |
| Type | Worm drive |
| Recommended Torque | 6.0 Nm (54 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Approval | Lloyd's Register Type Approval (marine, offshore, industrial) |
| Applications | Marine, offshore & industrial (Lloyd's Register Type Approved); pumping, stormwater & wastewater systems; agricultural irrigation networks (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | HGS120BP | HGZ120BG | HGS70RP | HGS60RP | HGS55RP |
| Material | Stainless steel | Mild steel zinc plated | Stainless steel | Stainless steel | Stainless steel |
| Clamping Range | 90-120mm | 90-120mm | 50-70mm | 45-60mm | 40-55mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size | Single size |
| Grade | 304 | 304 | 304 | 304 | |
| Pack Qty | 10 | 10 | 10 | 10 | 10 |
A. It adjusts between 90-120mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 90-120mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 3 9/16 to 4 3/4 in, covering common 4 and 4 1/2 in hose sizes.
A. JCS recommends 6.0 Nm (54 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. Yes - every component is the same grade of stainless steel, verified through JCS's salt mist testing, so there is no mixed-metal weak point to corrode first.
A. That is one of their core applications: JCS stainless clips serve temporary and permanent pumping, stormwater and overflow systems, wastewater treatment works, and agricultural irrigation networks, where corrosion resistance decides service life.
A. For most marine and wet industrial duty, this 304 (18/8) clip with its Lloyd's Register Type Approval is the standard answer. JCS reserves its 316 grade for the most demanding settings - offshore, food and pharmaceutical - so if that is your application, ask us about options.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 10 clips, all 90-120mm adjustment range. Other pack formats of the same clip are listed separately.
A. We accept all major credit and debit cards, along with PayPal.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
