Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Salt, spray and chemicals make short work of plated steel; a hose clip for that duty has to be stainless through and through.
The HGS22RP is a Hi-Grip worm drive clip adjusting between 14-22mm. Its band edges are fully rounded to protect the hose, and the hex screw is cold-headed and work-hardened with rolled threads, so it resists slipping or rounding under the driver. Tighten incrementally to the recommended 5.0 Nm (45 lb-in); over-tightening is what damages hoses. The range is manufactured to exceed BS5315 and carries the BSI Kitemark and NATO approval.
The bag of 10 is the trade format - boatyards, pump engineers and treatment-plant maintenance buying stainless by quantity. Specification is unchanged: 18/8 304 stainless in every component, salt mist tested, Lloyd's Register Type Approved for marine, offshore and industrial service, and used across pumping, stormwater, wastewater and irrigation systems.
Also available - the same clip as a 5-pack (HGS22PM1); the 13-20mm size (HGS20RP); the 17-25mm size (HGS25RP); a zinc plated version in the same size and pack (HGZ22RP).
Lloyd's Register Type Approval on a stocked, off-the-shelf trade pack is rare at any price point.
| Adjustment Range | 14-22mm (approx 9/16 - 7/8 in) |
|---|---|
| Material | 304 stainless steel 18/8 (EN 1.4301), all components stainless |
| Type | Worm drive |
| Recommended Torque | 5.0 Nm (45 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Approval | Lloyd's Register Type Approval (marine, offshore, industrial) |
| Applications | Marine, offshore & industrial (Lloyd's Register Type Approved); pumping, stormwater & wastewater systems; agricultural irrigation networks (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | HGS22PM1 | HGS20RP | HGS25RP | HGZ22RP |
| Material | Stainless steel | Stainless steel | Stainless steel | Mild steel zinc plated |
| Clamping Range | 14-22mm | 13-20mm | 17-25mm | 14-22mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size |
| Grade | 304 | 304 | 304 | |
| Pack Qty | 5 | 10 | 10 | 10 |
A. It adjusts between 14-22mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 14-22mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 9/16 to 7/8 in, covering common 5/8 and 3/4 in hose sizes.
A. JCS recommends 5.0 Nm (45 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. Yes - every component is the same grade of stainless steel, verified through JCS's salt mist testing, so there is no mixed-metal weak point to corrode first.
A. Yes - JCS stainless hose clips are used across water and drainage infrastructure, including pumping solutions, stormwater and overflow management, wastewater treatment and agricultural irrigation networks.
A. For most marine and wet industrial duty, this 304 (18/8) clip with its Lloyd's Register Type Approval is the standard answer. JCS reserves its 316 grade for the most demanding settings - offshore, food and pharmaceutical - so if that is your application, ask us about options.
A. The screw is cold-headed and work-hardened with a sharply defined hexagon and rolled threads to resist slipping and rounding. For high-vibration applications JCS recommends rechecking the clip after use to maintain seal integrity.
A. This is a pack of 10 clips, all 14-22mm adjustment range. Other pack formats of the same clip are listed separately.
A. Yes - WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
A. We accept all major credit and debit cards, along with PayPal.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
