Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGZ35PM1
Variations
Few parts cost less or matter more than the clip sealing a hose to its fitting - when it slips, everything it feeds stops.
The HGZ35PM1 is a Hi-Grip worm drive clip adjusting between 25-35mm. Its band edges are fully rounded to protect the hose, and the hex screw is cold-headed and work-hardened with rolled threads, so it resists slipping or rounding under the driver. Tighten incrementally to the recommended 5.0 Nm (45 lb-in); over-tightening is what damages hoses. The range is manufactured to exceed BS5315 and carries the BSI Kitemark and NATO approval.
The band is mild steel, heavily electro zinc plated, passivated and tested to EN9227 - JCS's general purpose specification for domestic, automotive and industrial duty away from salt and standing moisture. One clip covers a wider span than a typical nut-and-bolt clamp, so fewer sizes cover more hoses. Seat it centrally over the barb when fitting.
Also available - the same clip in a 10-pack (HGZ35PM2); the 22-30mm size (HGZ30PM1); the 30-40mm size (HGZ40PM1); a 304 stainless version of the same size and pack (HGS35PM1); and the related pack (HGZ35RP); and the related pack (HGZ35BP).
The larger adjustment range per size means one JCS clip covers spans that would take two ordinary nut-and-bolt clamps.
| Adjustment Range | 25-35mm (approx 1 - 1 3/8 in) |
|---|---|
| Material | Zinc plated mild steel (passivated, EN9227 tested) |
| Type | Worm drive |
| Recommended Torque | 5.0 Nm (45 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Applications | Domestic, automotive & industrial hose connections; used across the automotive sector and by leading agricultural machinery manufacturers (per JCS) |
| Pack Quantity | 5 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Hose Clip 25-35mm, 304 Stainless Steel Worm Drive - JCS Hi-Grip HGS35PM1 (5 Pack)
£10.73
£10.42
3% OFF
|
|||||
| Technical Specification | ||||||
|---|---|---|---|---|---|---|
| PRODUCT NUMBER | HGZ35PM2 | HGZ30PM1 | HGZ40PM1 | HGS35PM1 | HGZ35RP | HGZ35BP |
| Material | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated | Stainless steel | Mild steel zinc plated | Mild steel zinc plated |
| Clamping Range | 25-35mm | 22-30mm | 30-40mm | 25-35mm | 25-35mm | 25-35mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size | Single size | Single size |
| Grade | 304 | |||||
| Pack Qty | 10 | 5 | 5 | 5 | 10 | 10 |
A. It adjusts between 25-35mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 25-35mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 1 to 1 3/8 in, covering common 1 and 1 1/4 in hose sizes.
A. JCS recommends 5.0 Nm (45 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. The band is heavily electro zinc plated and passivated, tested to EN9227, and JCS plates the steel after cutting so the cut edges are coated too. It is intended for non-corrosive environments such as domestic and light industrial use - for wet, salty or chemical-exposed duty choose the Hi-Grip Stainless version.
A. JCS advises against zinc plated clips in marine conditions, where they can corrode or seize. For boats and other saltwater environments use Hi-Grip Stainless, which is 18/8 marine-quality 304 stainless steel with Lloyd's Register Type Approval.
A. The zinc plated Hi-Grip is JCS's general purpose worm drive clip for domestic, automotive and industrial hose connections in non-corrosive environments. JCS clips are used across the automotive sector and by leading agricultural machinery manufacturers.
A. The screw is cold-headed and work-hardened with a sharply defined hexagon and rolled threads to resist slipping and rounding. For high-vibration applications JCS recommends rechecking the clip after use to maintain seal integrity.
A. This is a pack of 5 clips, all 25-35mm adjustment range. Other pack formats of the same clip are listed separately.
A. Every product comes with a different guarantee and warranty. Warranty details are shown in the product's tech specs or datasheet where available.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
