Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGZ35BP
Few parts cost less or matter more than the clip sealing a hose to its fitting - when it slips, everything it feeds stops.
The HGZ35BP is a Hi-Grip worm drive clip adjusting between 25-35mm. Its band edges are fully rounded to protect the hose, and the hex screw is cold-headed and work-hardened with rolled threads, so it resists slipping or rounding under the driver. Tighten incrementally to the recommended 5.0 Nm (45 lb-in); over-tightening is what damages hoses. The range is manufactured to exceed BS5315 and carries the BSI Kitemark and NATO approval.
This is trade depth in one box - 10 clips of one size, zinc plated and passivated over mild steel with the plating applied after cutting. Intended for non-corrosive domestic, automotive and industrial service; for wet or salty duty JCS points buyers to its stainless range. One Hi-Grip covers a wider span than a typical nut-and-bolt clamp, so fewer bins cover more hoses.
Also available - the same clip as a retail carton (HGZ35RP); the same clip as a 5-pack (HGZ35PM1); the 22-30mm size (HGZ30BP); the 30-40mm size (HGZ40BP).
Designed, made and batch-tested in-house at Sudbury, Suffolk under ISO 9001:2015 - an everyday clip built to an approval list most premium clips cannot match.
| Adjustment Range | 25-35mm (approx 1 - 1 3/8 in) |
|---|---|
| Material | Zinc plated mild steel (passivated, EN9227 tested) |
| Type | Worm drive |
| Recommended Torque | 5.0 Nm (45 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Applications | Domestic, automotive & industrial hose connections; used across the automotive sector and by leading agricultural machinery manufacturers (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | HGZ35RP | HGZ35PM1 | HGZ30BP | HGZ40BP |
| Material | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated |
| Clamping Range | 25-35mm | 25-35mm | 22-30mm | 30-40mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size |
| Pack Qty | 10 | 5 | 10 | 10 |
A. It adjusts between 25-35mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 25-35mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 1 to 1 3/8 in, covering common 1 and 1 1/4 in hose sizes.
A. For this size band JCS publishes a recommended torque of 5.0 Nm (45 lb-in). Work up to it gradually with the clip seated centrally on the barb; going past it risks damaging the hose rather than improving the seal.
A. JCS advises against zinc plated clips in marine conditions, where they can corrode or seize. For boats and other saltwater environments use Hi-Grip Stainless, which is 18/8 marine-quality 304 stainless steel with Lloyd's Register Type Approval.
A. Anywhere a flexible hose seals onto a rigid fitting in dry or general conditions - vehicles, garden and grounds machinery, air lines, workshop and light industrial pipework. JCS supplies the automotive sector and leading agricultural machinery manufacturers.
A. JCS recommends asking three questions: what is the hose carrying (water, fuel, chemicals, air)? What pressure and temperature will it see? And is the environment corrosive? The answers drive material choice - zinc plated for general non-corrosive use, stainless for corrosive environments - then match the clip's range to the fitted hose diameter.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 10 clips, all 25-35mm adjustment range. Other pack formats of the same clip are listed separately.
A. Yes - WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
A. We accept all major credit and debit cards, along with PayPal.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
