Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGZ35PM2
Variations
Most hose failures start at the connection, not the hose - a clip that creeps loose under vibration lets the joint seep long before it lets go.
This is the 25-35mm size of the Hi-Grip worm drive range. Where cheaper clips cut their threads and leave sharp band edges, JCS rolls the screw threads for strength and fully rounds the band edges so the hose is protected as the clip bites. JCS publishes a recommended torque of 5.0 Nm (45 lb-in) for this size - seat the clip centrally on the barb and work up to it gradually. Hi-Grip exceeds BS5315 and holds BSI Kitemark and NATO approvals.
Made from heavily electro zinc plated and passivated mild steel, tested to EN9227, it suits general purpose work in non-corrosive environments - domestic, automotive and industrial hose connections. Measure the outside diameter of the hose when fitted and choose the clip whose range covers it. JCS supplies leading agricultural machinery manufacturers, and the same clips serve garden machinery, workshop and light industrial pipework.
Also available - the same clip in a 5-pack (HGZ35PM1); the 22-30mm size (HGZ30PM2); the 30-40mm size (HGZ40PM2); a 304 stainless version of the same size and pack (HGS35PM2).
The larger adjustment range per size means one JCS clip covers spans that would take two ordinary nut-and-bolt clamps.
| Adjustment Range | 25-35mm (approx 1 - 1 3/8 in) |
|---|---|
| Material | Zinc plated mild steel (passivated, EN9227 tested) |
| Type | Worm drive |
| Recommended Torque | 5.0 Nm (45 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Applications | Domestic, automotive & industrial hose connections; used across the automotive sector and by leading agricultural machinery manufacturers (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Hose Clip 25-35mm, 304 Stainless Steel Worm Drive - JCS Hi-Grip HGS35PM2 (10 Pack)
£18.16
£17.63
3% OFF
|
|||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | HGZ35PM1 | HGZ30PM2 | HGZ40PM2 | HGS35PM2 |
| Material | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated | Stainless steel |
| Clamping Range | 25-35mm | 22-30mm | 30-40mm | 25-35mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size |
| Grade | 304 | |||
| Pack Qty | 5 | 10 | 10 | 10 |
A. This size spans 25-35mm of fitted hose outside diameter. Measure the hose over its fitting, not the bare bore - anywhere inside 25-35mm and the HGZ35PM2 is the right clip. One JCS size covers a span that would take two fixed nut-and-bolt clamps. In imperial terms that is roughly 1 to 1 3/8 in, covering common 1 and 1 1/4 in hose sizes.
A. For this size band JCS publishes a recommended torque of 5.0 Nm (45 lb-in). Work up to it gradually with the clip seated centrally on the barb; going past it risks damaging the hose rather than improving the seal.
A. JCS advises against zinc plated clips in marine conditions, where they can corrode or seize. For boats and other saltwater environments use Hi-Grip Stainless, which is 18/8 marine-quality 304 stainless steel with Lloyd's Register Type Approval.
A. The zinc plated Hi-Grip is JCS's general purpose worm drive clip for domestic, automotive and industrial hose connections in non-corrosive environments. JCS clips are used across the automotive sector and by leading agricultural machinery manufacturers.
A. JCS recommends asking three questions: what is the hose carrying (water, fuel, chemicals, air)? What pressure and temperature will it see? And is the environment corrosive? The answers drive material choice - zinc plated for general non-corrosive use, stainless for corrosive environments - then match the clip's range to the fitted hose diameter.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 10 clips, all 25-35mm adjustment range. Other pack formats of the same clip are listed separately.
A. Every product comes with a different guarantee and warranty. Warranty details are shown in the product's tech specs or datasheet where available.
A. WhatsApp us on 07754 288583 with photos of the item and packaging.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
