Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £5.49 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Engineered for maximum vibration isolation at lighter loads, the 5018MFB25-45 is a 50 x 18 mm Male Flat Buffer with an M10 x 25 stud, rated to 360 kg maximum load and a 4.0 mm deflection, figures that reflect the generous movement this 45 Shore A compound is built to give under real working conditions. Where isolation efficiency takes priority over rigid restraint, this soft-grade buffer absorbs and dissipates energy more readily than firmer variants, making it the preferred choice wherever protecting sensitive components or minimising transmitted vibration to surrounding structures is the primary objective. The rubber-to-metal bonded construction combines a natural rubber element with a steel stud in a single, ready-to-fit assembly. At 45 Shore A this compound responds to lower-frequency excitation with greater compliance, reducing the vibration energy that reaches connected structures and improving operator comfort in manned equipment. The flat buffer geometry allows direct contact with a secondary surface, functioning as a bump stop against an impacting component or as an elastic element in a simple mounting arrangement, with installation requiring no special tooling beyond a standard spanner. Typical applications for this soft-grade variant include agricultural machinery where ground-induced low-frequency shock is prevalent, elevator and lifting equipment where controlled cushioning of travel limits is required, and light industrial plant where sensitive instrumentation or control panels benefit from the superior isolation this durometer provides. The buffer is also appropriate for marine and power-generation installations where access constraints favour a compact, low-profile mount.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 45 |
|---|---|
| Body diameter D (mm) / Overall height H (mm) | 50 x18 |
| Stud thread d | M10 |
| Stud length L (mm) | 25 |
| Max load (kg) | 360 |
| Deflection (mm) | 4 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £5.49
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Male Flat Buffer - Anti-Vibration, Thread Size M10, Max Load 364Kg - 5030MFB25-60
£10.51
£10.30
2% OFF
|
||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 5021FFB10-45 | 5030FFB12-60 | 5040FFB10-70 | 5030MFB25-60 | 5030FFB10-60 |
| Type | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer |
| Length | 21mm | 30mm | 40mm | ||
| Height | 30mm | 30mm | |||
| Size | 50x21mm | 50x30mm | 50x40mm | 50x30mm | |
| Deflection | 5 | 7.5 | 10 | 7.5 | 7.5 |
| Diameter | 50mm | 50mm | 50mm | ||
| Diameter Range | 26-50mm | 26-50mm | 26-50mm | ||
| Length Range | 11-25mm | 26-50mm | 26-50mm | ||
| Shore Hardness | 45 | 60 | 70 | ||
| Thread | M10 | M12 | M10 | M10 | M10 |
| Show More | |||||
A. The buffer measures 50 mm diameter by 18 mm height, with an M10 x 25 mm male stud. Maximum load is 360 kg and deflection is 4.0 mm.
A. At 45 Shore A this is the softest grade in the 50 x 18 mm Male Flat Buffer range. Softer rubber delivers greater deflection and better vibration isolation at lower loads, making it suitable where reducing transmitted vibration and protecting sensitive equipment takes priority over maximum load-bearing or minimal movement.
A. It is suited to agricultural machinery, elevators and lifting equipment, light industrial plant, marine installations, and power-generation equipment — anywhere lower-frequency vibration isolation or cushioned bump-stop action is needed without high structural loads.
A. Male Flat buffers may be loaded in compression, shear, or a combination of both. They absorb and dissipate energy on contact with a secondary surface, reducing impact force and isolating vibration transmitted to connected structures.
A. The buffer uses rubber-to-metal bonded construction, permanently bonding the rubber element to the steel stud for a secure, ready-to-install assembly.
A. Yes — the same form factor is available in 60 Shore A (5018MFB25-60) and 70 Shore A (5018MFB25-70) for applications requiring higher load capacity or less deflection.
A. Yes — stainless steel hardware and oil-resistant or high-temperature rubber compounds are available on request, as are additional and custom sizes.
A. WhatsApp us on 07754 288583 with photos of the item and packaging, and we will resolve the issue in line with our returns policy.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
