Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 2030MFB18-60
Variations
Balanced across a broad middle ground of load and compliance, the 2030MFB18-60 is a 20 x 30 mm Male Flat Buffer with an M6 x 18 mm stud, rated to a maximum load of 31.0 kg and a deflection of 7.5 mm at 60 Shore A hardness, a medium grade built to give an effective equilibrium between vibration isolation and structural support. Where softer grades prioritise deflection and harder grades prioritise rigidity, this 60 Shore A mount serves the broad middle ground of general-purpose machinery mounting across diverse industrial environments. Rubber-to-metal bonded construction gives the 2030MFB18-60 durability in service, and its flat male buffer geometry enables quick, direct installation as a low-cost shock and vibration absorption solution. The rubber element works by absorbing and dissipating energy from impact or continuous vibration, reducing transmitted force to surrounding structures and improving operator comfort. Mounts of this type may be loaded in shear, compression, or a combination of both. At 60 Shore A, this medium-hardness grade suits general-purpose applications across construction equipment, industrial machinery, agricultural equipment, and commercial vehicles where a single mount must handle moderate dynamic loads without excessive movement. It is equally applicable in elevators and power generation plant where consistent, repeatable deflection under mixed loading conditions is required. The 20 x 30 mm body and M6 stud make it well suited to compact installations where space is constrained but load demands are moderate. Custom options including stainless steel hardware and oil-resistant or high-temperature rubber compounds are available on request.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 60 |
|---|---|
| Body diameter D (mm) | 20 |
| Overall height H (mm) | 30 |
| Stud thread d | M6 |
| Stud length L (mm) | 18 |
| Max load (kg) | 31 |
| Deflection (mm) | 7.5 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 1508MFB10-45 | 2030FFB06-60 | 1520FFB04-70 | 1515FFB04-60 | 2015FFB06-60 |
| Type | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer |
| Length | 08mm | 30mm | 20mm | 15mm | |
| Height | 15mm | ||||
| Size | 15x08mm | 20x30mm | 15x20mm | 15x15mm | 20x15mm |
| Deflection | 2 | 7.5 | 5 | 3.75 | 3.75 |
| Diameter | 15mm | 20mm | 15mm | 15mm | |
| Diameter Range | 11-25mm | 11-25mm | 11-25mm | 11-25mm | |
| Length Range | Up to 10mm | 26-50mm | 11-25mm | 11-25mm | |
| Shore Hardness | 45 | 60 | 70 | 60 | |
| Thread | M4 | M6 | M4 | M4 | M6 |
| Show More | |||||
A. The 2030MFB18-60 has a body diameter and height of 20 x 30 mm, an M6 x 18 mm male stud, a maximum load rating of 31.0 kg, and a deflection of 7.5 mm.
A. 60 Shore A is a medium hardness grade. It sits between softer grades, which give greater deflection and better isolation at lower load, and harder grades, which carry higher load with less movement. The 60 Shore A grade provides a balance of vibration isolation and structural support, making it suited to general-purpose mounting applications with moderate dynamic loads.
A. This buffer is suited to construction equipment, industrial machinery, agricultural equipment, commercial vehicles, elevators, and power generation plant — anywhere a compact mount must manage moderate loads in shear, compression, or combined loading conditions.
A. Male Flat Buffers work by absorbing and dissipating energy from impact or continuous vibration through the rubber element. This reduces the force transmitted to surrounding structures, protects machinery components, and improves operator comfort.
A. The same geometry is available as the 2030MFB18-45 at 45 Shore A (softer grade, greater deflection, lighter-duty isolation) and the 2030MFB18-70 at 70 Shore A (firmer grade, higher load capacity, less movement). Select the grade that matches your load and deflection requirements.
A. Yes. Stainless steel hardware and oil-resistant or high-temperature rubber compounds are available on request, along with additional and custom sizes.
A. WhatsApp us on 07754 288583 with photos of the item and packaging, and we will resolve the issue in line with our returns policy.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
