Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 2008MFB18-60
Variations
Balancing elastic support with effective energy absorption, the 2008MFB18-60 is a 20 x 8 mm male flat buffer rated at 60 Shore A, a medium hardness suited to the broad middle ground of machinery mounting where neither extreme compliance nor maximum stiffness is required. With an M6 x 18 mm stud, a maximum load rating of 68.0 kg and a controlled deflection of 2.0 mm, this compact unit is designed to cushion impact shocks and reduce transmitted vibration from a secondary object or from direct contact with a surface, improving machinery lifespan and protecting surrounding structures. Rubber-to-metal bonded construction keeps the assembly secure and consistent under repeated loading. At 60 Shore A, the rubber compound sits at the practical centre of the hardness range: firmer than softer grades so movement under load stays within the 2.0 mm deflection figure, yet compliant enough to absorb moderate shocks and provide meaningful isolation for sensitive equipment. The flat buffer geometry keeps installation straightforward and the low-profile 8 mm height suits confined or space-restricted mounting arrangements. Custom options, including stainless steel metalwork and oil-resistant or high-temperature rubber compounds. Are available on request. Typical applications include industrial machinery, commercial vehicles, agricultural equipment, construction equipment and elevators. The 60 Shore A grade is particularly well matched to general-purpose mounting duties across power generation, marine, automotive and railway environments where a predictable mid-range load-deflection response is more useful than the high compliance of a softer grade or the stiffness of a harder one.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 60 |
|---|---|
| Body diameter D (mm) | 20 |
| Overall height H (mm) | 08 |
| Stud thread d | M6 |
| Stud length L (mm) | 18 |
| Max load (kg) | 68 |
| Deflection (mm) | 2 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 2005MFB20-60 | 2008MFB12-60 | 2008MFB20-60 | 2515MFB18-45 | 2517FFB06-45 |
| Type | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer | Flat Buffer |
| Length | 15mm | 17mm | |||
| Height | 5mm | 8mm | 8mm | ||
| Size | 25x15mm | 25x17mm | |||
| Deflection | 2 | 2 | 2 | 3.75 | 4.25 |
| Diameter | 25mm | 25mm | |||
| Diameter Range | 11-25mm | 11-25mm | |||
| Length Range | 11-25mm | 11-25mm | |||
| Shore Hardness | 45 | 45 | |||
| Thread | M5 | M6 | M6 | M6 | M6 |
| Show More | |||||
A. The buffer measures 20 mm diameter by 8 mm height, with an M6 x 18 mm male stud. Maximum load rating is 68.0 kg and controlled deflection is 2.0 mm.
A. This buffer is 60 Shore A, a medium hardness. Softer grades give greater deflection and better isolation at lower loads; harder grades carry higher loads with less movement. At 60 Shore A, this unit balances elastic support with load-carrying capacity, making it suited to general-purpose machinery mounting across a wide range of industries.
A. The buffer is designed for use in industrial machinery, agricultural equipment, construction equipment, commercial vehicles and elevators. Industries served include power generation, marine, railway and mass transit, automotive, and military and defence.
A. Male flat buffers work by absorbing and dissipating energy through their rubber element. The rubber-to-metal bonded construction allows the buffer to cushion impact forces from a secondary moving object or to act as an elastic element in direct contact with a surface, reducing transmitted shock and vibration.
A. Yes. The same 20 x 8 mm, M6 x 18 mm form factor is available in 45 Shore A (2008MFB18-45) and 70 Shore A (2008MFB18-70) for applications requiring softer or firmer response respectively.
A. Yes. Stainless steel metalwork and oil-resistant or high-temperature rubber compounds are available on request, as are additional and custom sizes.
A. WhatsApp us on 07754 288583 with photos of the item and packaging, and we will resolve the issue in line with our returns policy.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
