Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £3.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 5061MCB28-60
Variations
Rated at a maximum load of 200 kg with a controlled deflection of 14.5 mm, the 50 x 61 mm conical buffer with M8 x 28 stud mounting delivers the balanced performance that general machinery installation demands. At 60 Shore A, this mid-range hardness grade sits at the crossroads of adequate load-bearing capacity and meaningful vibration isolation, making it the workhorse choice where neither extreme softness nor maximum stiffness is appropriate, simply reliable, broad-spectrum damping under moderate operational loads. Rubber-to-metal bonded construction gives the mount consistent mechanical integrity across its working life. The conical geometry allows the buffer to be loaded in compression, shear, or a combination of both, accommodating the multi-directional forces common in industrial and off-highway environments. Energy is absorbed and dissipated through the rubber element, cushioning machinery against impact shocks from external moving components and reducing the transmission of vibration to surrounding structures and operators alike. Applications span a wide cross-section of industry: power generation plant and marine installations where sustained moderate vibration must be controlled; agricultural and construction equipment subjected to repeated operational shock; commercial vehicles and industrial machinery where mount deflection must be predictable rather than excessive. The 60 Shore A grade is equally suited to primary and secondary suspension roles on industrial vehicles, where a measured compliance is preferable to the greater movement of softer compounds. Custom configurations, including oil-resistant or high-temperature rubbers and stainless steel metalwork. Are available on request.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 60 |
|---|---|
| Body diameter D (mm) | 50 |
| Overall height H (mm) | 61 |
| Stud thread d | M8 |
| Stud length L (mm) | 28 |
| Max load (kg) | 200 |
| Deflection (mm) | 14.5 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £3.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 6060MCB37-45 | 4535MCB23-70 | 7589MCB37-60 | 6040MCB62-45 | 100120MCB31-45 |
| Type | Buffer | Buffer | Buffer | Buffer | Buffer |
| Length | 60mm | 35mm | 89mm | 40mm | 121mm |
| Size | 60x60mm | 45x35mm | 75x89mm | 60x40mm | 105x121mm |
| Deflection | 15 | 7.5 | 21.2 | 10 | 30 |
| Diameter | 60mm | 45mm | 75mm | 60mm | 105mm |
| Diameter Range | 51-100mm | 26-50mm | 51-100mm | 51-100mm | 101-200mm |
| Length Range | 51-100mm | 26-50mm | 51-100mm | 26-50mm | 101-200mm |
| Shore Hardness | 45 | 70 | 60 | 45 | 45 |
| Thread | M12 | M8 | M12 | M14 | M12 |
| Show More | |||||
A. The buffer measures 50 mm in diameter by 61 mm in height, with an M8 x 28 stud. Maximum rated load is 200 kg, and controlled deflection is 14.5 mm at that load.
A. At 60 Shore A, this grade balances load-bearing capacity with vibration isolation. Softer grades offer greater deflection and better isolation at lower loads, while harder grades carry higher loads with less movement. The 60 Shore A sits at the general-purpose midpoint, suited to moderate operational loads where predictable, controlled deflection is needed.
A. The buffer is suited to a broad range of applications including power generation, marine installations, agricultural equipment, construction and off-highway machinery, commercial vehicles, and general industrial equipment — anywhere moderate vibration damping and shock absorption are required.
A. The rubber-to-metal bonded construction allows the buffer to be loaded in compression, shear, or a combination of both. The rubber element absorbs and dissipates energy from impact shocks and sustained vibration, protecting surrounding structures and improving operator comfort.
A. Yes. Conical buffers of this type are used for both primary and secondary suspension on industrial vehicles, in addition to cushioning machinery against impact from external moving components.
A. Yes. The same format is available in 45 Shore A for greater isolation and deflection (SKU 5061MCB28-45) and 70 Shore A for higher load capacity with reduced movement (SKU 5061MCB28-70).
A. Yes. Options including stainless steel metalwork, oil-resistant rubber, and high-temperature rubber compounds, as well as additional and custom sizes, are available on request.
A. WhatsApp us on 07754 288583 with photos of the item and packaging, and we will resolve the issue in line with our returns policy.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
