Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £5.49 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.95 | 7 to 10 working days |
Product Number: 4535MCB23-60
Variations
Striking a measured balance between deflection and load-carrying capacity, the 4535MCB23-60 is a 45 x 35 mm conical rubber buffer with an M8 x 23 mm male stud, rated to a maximum load of 140.0 kg with a controlled deflection of 7.5 mm at 60 Shore A hardness. This medium-grade geometry is designed to serve the broad middle ground of machinery mounting, where neither extreme compliance nor rigid restraint is required. The rubber-to-metal bonded construction absorbs and dissipates energy from impact shocks and continuous vibration, cushioning machinery against contact with external moving components. At 60 Shore A, the mount delivers a practical equilibrium: enough give to attenuate vibration effectively across a range of operating frequencies, and enough stiffness to maintain positional stability under moderate to substantial loads. This makes it well suited to general-purpose industrial machinery, power generation equipment, and agricultural plant where consistent performance under varying duty cycles is the priority. Conical buffers of this type may be loaded in shear, compression, or a combination of both, lending application versatility across mounting configurations. The 45 x 35 mm conical profile is appropriate for commercial vehicle secondary suspension, construction and off-highway equipment, marine installations, and railway and mass transit applications where a mainstream, general-machinery mounting solution is called for. Custom variants in oil-resistant or high-temperature rubbers, and stainless steel metalwork, are available on request.
About PartsForMachines:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Hardness (Shore A) | 60 |
|---|---|
| Body diameter D (mm) / Overall height H (mm) | 45 x35 |
| Stud thread d | M8 |
| Stud length L (mm) | 23 |
| Max load (kg) | 140 |
| Deflection (mm) | 7.5 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £5.49
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 5058MCB20-45 | 5061MCB28-45 | 5064MCB35-45 | 5067MCB33-45 | 5068MCB38-45 |
| Type | Buffer | Buffer | Buffer | Buffer | Buffer |
| Length | 58mm | 61mm | 64mm | 67mm | 68mm |
| Size | 50x58mm | 50x61mm | 50x64mm | 50x67mm | 50x68mm |
| Deflection | 15 | 14.5 | 16 | 16 | 16.2 |
| Diameter | 50mm | 50mm | 50mm | 50mm | 50mm |
| Diameter Range | 26-50mm | 26-50mm | 26-50mm | 26-50mm | 26-50mm |
| Length Range | 51-100mm | 51-100mm | 51-100mm | 51-100mm | 51-100mm |
| Shore Hardness | 45 | 45 | 45 | 45 | 45 |
| Thread | M8 | M8 | M8 | M8 | M10 |
| Show More | |||||
A. The buffer measures 45 mm outer diameter by 35 mm height, with an M8 x 23 mm male stud. It is rated to a maximum load of 140.0 kg with a deflection of 7.5 mm at 60 Shore A hardness.
A. This buffer is 60 Shore A, a medium grade that balances vibration isolation and load support. It provides enough compliance to attenuate vibration across a range of frequencies while retaining the stiffness needed to maintain positional stability under moderate to substantial loads — making it appropriate for general-purpose industrial, agricultural, and power generation machinery.
A. Conical buffers of this type are used in construction and off-highway equipment, agricultural machinery, industrial plant, power generation, commercial vehicles, marine installations, and railway and mass transit applications. They cushion machinery against impact shocks from external moving components and can also serve as primary or secondary suspension elements on industrial vehicles.
A. The rubber-to-metal bonded construction works by absorbing and dissipating energy from impacts and vibration. The mount can be loaded in shear, compression, or a combination of both, providing versatility across different mounting orientations and configurations.
A. Yes. The same 45 x 35 mm M8 geometry is available in 45 Shore A (SKU 4535MCB23-45) for greater deflection and improved isolation at lower loads, and 70 Shore A (SKU 4535MCB23-70) for higher-load applications requiring less movement.
A. Yes — stainless steel metalwork, oil-resistant rubber, and high-temperature rubber compounds, as well as additional and custom sizes, are available on request.
A. WhatsApp us on 07754 288583 with photos of the item and packaging, and we will resolve the issue in line with our returns policy.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
